Abstract:3-D Hybrid halide perovskites (HHPs) have garnered significant interest as a promising contender for next-generation resistive random access memory (ReRAM) technology. However, challenges such as variations in cycle-to-cycle switching iterations, operating voltages, and restrained reproducibility arise due to the disproportionate presence of grain size (GS) and grain boundaries (GBs), which are impediments to the widespread adoption of perovskite-based memory devices in commercial applications. Since GBs present in the thin film act as pathways for ion/cation migrations that eventually lead to the formation of conducting filament (CF), by regulating GBs, the resistive switching (RS) performance of the memory devices can also be improved. Herein, we initially optimized GS and thus GBs in the 3-D HHP thin film by the incorporation of FA+ in the MAPbI3 3-D HHP to prepare double-cation 3-D MAFAPbI3 HHP and determined that the doping of 10% FAI improved the MAFAPbI3 film quality with an average grain size of ∼209.68 and 6.65 nm surface roughness, resulting in higher GBs that led to the stable RS of the fabricated Ag/MAFAPbI3/FTO up to 491 cycles under dark conditions and 245 cycles under white light illumination with significantly low statistical variations (σ/μ %) in the consecutive switching cycles. This performance was achieved while maintaining low-resistance states (LRS) and high-resistance-states (HRS) ratios, i.e., LRS/HRS of ∼15.2 (dark) and ∼54.3 (white light) conditions at power consumption of ∼0.101 mW. Further, to improve LRS/HRS, the PEAI passivation layer was deposited over the optimized MAFAPbI3 switching layer (SL) through spin-coating, and the fabricated Ag/PEAI/MAFAPbI3/FTO ReRAM configuration exhibited LRS/HRS ∼105 at considerably low power, i.e., 0.12 and 0.23 mW while operating under dark and white light illumination, respectively. Furthermore, the RS mechanisms of Ag/MAFAPbI3/FTO and Ag/PEAI/MAFAPbI3/FTO were discussed and supported by the electrochemical metallization (ECM) model.

Fabrication of C12H28ClN-assisted perovskites thin films with micrometer-sized grains via low-temperature hot-casting in ambient air for resistive memory device application

Aqueous phase fabrication and conversion of Pb(OH)Br into a CH<sub>3</sub>NH<sub>3</sub>PbBr<sub>3</sub> perovskite and its application in resistive memory switching devices

Fabrication of High Quality Lead-free Double Perovskite Cs2AgBiBr6 Thin Film and its Application in Memristor with Ultralow Operation Voltage

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Electro-Optically Tunable Passivated Double-Cation Perovskite-Based ReRAM for Low-Power Memory Applications

Rare earth halide double perovskites for high-performance resistive random access memory

Organometal tri-halide perovskite resistive switching device with PMMA electrode interlayer

One-Dimensional (NH=CINH 3 ) 3 PbI 5 Perovskite for Ultralow Power Consumption Resistive Memory

Modulating Metallic Conductive Filaments Via Bilayer Oxides in Resistive Switching Memory

Controllable Extrinsic Ion Transport in Two-Dimensional Perovskite Films for Reproducible, Low-Voltage Resistive Switching

Low Temperature Improvement Method on ${\rm Zn{:}SiO}_{x}$ Resistive Random Access Memory Devices

Single-Crystalline Thin-Film Memory Arrays of Molecular Ferroelectrics with Ultralow Operation Voltages

Tunable lanthanum doping in double perovskite films for read-only memory

Extremely Low Operating Current Resistive Memory Based on Exfoliated 2D Perovskite Single Crystals for Neuromorphic Computing.

Self-Rectifying Gr/TMDC Heterostructures: Candidates for Resistive Switching Memory Devices

High-performance Bilayer Flexible Resistive Random Access Memory Based on Low-Temperature Thermal Atomic Layer Deposition

Resistive Switching and Synaptic Behavior of Perovskite Lanthanum Orthoferrite Thin Film for Neuromorphic Computing

Rare earth Nd-doping lead-free double perovskite Cs2AgBiBr6 films with improved resistive memory performance

Electrochemical Fabrication of A Memory Device Based on Conducting Polymer Nanocomposites

Robust mica perovskite photoelectric resistive switching memory

Fabrication of One-Dimensional Organic Nanofiber Networks via Electrophoretic Deposition for a Nonvolatile Memory Device