Abstract:The stacking sequences of fiber-reinforced composites for optimization of turbine blades with the best performance have become a focus of attention. However, the optimization and design principles of its flexural performance are not yet mature. Referring to the problems in previous work, a 3D finite element flexural model of carbon fiber reinforced composites was established based on the Abaqus/Explicit VUMAT subroutine through the Tsai-Wu failure criterion. The influencing laws and optimization mechanisms of different stacking patterns (e.g., different orientations, number of orientation plies, combination of multiple orientation plies, and symmetry/asymmetry structures) on the flexural properties of the composites were systematically investigated, and corresponding design references for the optimization of stacking patterns were given. The results show that the smaller the value of ∣θ−45°∣ (θ represents the angle of the orientation ply), the more obvious the stress reduction of the orientation ply, and the orientation ply located in the outer layer is more conducive to the improvement of flexural performance. As the number of orientation plies increases, the flexural strength and displacement increase, but the stability decreases, in which the laminate with 50 % 0° orientation plies has the best overall performance. In addition, the stability ranking of the laminate stacking sequences for the same 0° orientation ply proportion is: multi-orientation asymmetric > multi-orientation symmetric > single-orientation symmetric. In particular, the [75/02/60/30/02/15] laminate has the best overall performance with the flexural strength of 974 MPa and the Y-axis offset of 0.057 mm, and its stability is 66 % higher than that of the [15/02/75]S laminate. Under the same tensile/compressive stresses, the actual stress of the warp/weft in the orientation ply is less than the maximum ideal stress and the stress of Y-axis direction SY ≠ 0, which delays the fracture of the orientation ply and causes displacement offset, and the increase of the number of orientation plies will aggravate this effect. The obtained highlighted results can provide valuable references for the design and optimization of stacking patterns of plain fabric-reinforced laminates with high flexural properties.

Investigation of Vibrational Behavior of the Hybrid Composite Shaft Using Experimental, Analytical, and Numerical Method

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Structural Design and Dynamic Analysis of Carbon Fiber Reinforced Plastic Shaft with Metal Parts

Multiscale dynamic behavior of imperfect hybrid matrix/fiber nanocomposite nested conical shells with elastic interlayer

Nonlinear forced vibration analysis of the composite shaft-disk system combined the reduced-order model with the IHB method

Free vibration analysis of functionally graded multilayer hybrid composite cylindrical shell panel reinforced by GPLs and CNTs surrounded by Winkler elastic foundation

Design of a Composite Drive Shaft and its Coupling for Automotive Application

Hierarchical Lattice Stiffened Cylindrical Shell: Design, High-Order Vibration Theory and Composite Parameter Identification

Auxetic honeycomb core layer effect on vibrations of annular plates based on shear deformation theory

The natural vibration of a symmetric cross-ply laminated composite conical-plate shell

Numerical Investigation on the Design and Optimization of Stacking Pattern for High Flexural Performance Carbon Fiber Reinforced Resin Matrix Composites

Optimisation of hybrid high-modulus/high-strength carbon fiber reinforced plastic composite drive

Nonlinear forced vibration of hybrid fiber/graphene nanoplatelets/polymer composite sandwich cylindrical shells with hexagon honeycomb core

Vibration analysis of asymmetric sandwich rotating FG porous discs coated with agglomerated nanocomposite facesheets

Free Vibration Analyses of Stiffened Functionally Graded Graphene-Reinforced Composite Multilayer Cylindrical Panel

Time-Efficient Soft Computational Approach on Vibration Response of Carbon-Enriched Drive Shafts of Super-Fast Race Cars

Dynamic performance of multi‐layered composite sandwich open cylindrical shells with double‐layered soft cores

Dynamic modeling and parametric instability analysis of internally damped rotating composite shafts in inertial and rotating frames

Effect of different stacking sequences on hybrid carbon/glass/epoxy composites laminate: Thermal, dynamic mechanical and long-term behavior

Optimal design of vibration resistance of fiber-reinforced composite sandwich plates embedded in a viscoelastic square honeycomb core