Abstract:Abstract Thermal barrier coatings are widely used in gas turbines to protect the gas turbine metal components against very high combustion product temperature. To improve energy efficiency, higher combustion temperatures are needed. A limiting factor at present is the stability under extreme and prolonged heating of thermal barrier coatings. The coatings are typically made by the air plasma sprayed process in which fine particles of yttria-stabilized zirconia (YSZ) are melted or partially melted and ejected from plasma jet at high speed onto the bond coated substrate metal. With increasing combustion temperature and pressure in the modern gas turbine engines radiative heat transfer is becoming an important portion of the overall heat transfer in the thermal barrier coating. This study has demonstrated that the commonly used Kubelka-Munk method in the radiative property reduction from the measured transmittance and reflectance spectra of YSZ coatings will incur inaccurate result when the coating optical thickness is not sufficiently large. An alternative method — the discrete ordinates method with the asymmetric spherical ring angular quadrature — is used instead. The absorption and scattering coefficients of air plasma sprayed YSZ films are determined over the wavelength range from 1 to 2.6 μm at room temperature. Over this near infrared wavelength range, the scattering coefficient decreases with the increasing wavelength and the absorption coefficient is very small overall. The pore size distributions before and after the 50-hr temperature gradient, thermal cycling are compared. The sintering effect as well as the crack growth will impact the coating radiative properties. These results point to a clear need for better understanding of the radiative heat transfer process, which includes the microstructure-property relationship, progressive changes of the radiative properties with the operation condition and time.

Evaluation on the Microstructure and Thermal Infrared Emissivity of Ca2+-doped Ytterbium Chromate Coating Deposited by Saucer-Shaped Porous Feedstocks for High-Temperature Thermal Protection

Doping engineering for high-temperature broadband high emissivity and low thermal conductivity of ytterbium chromate-based ceramics

A Promising Radiation Thermal Protection Coating Based on Lamellar Porous Ca‐Cr Co‐doped Y3NbO7 Ceramic

Thermal durability of ytterbium silicate environmental barrier coating prepared by suspension plasma spray

Ca-Mn co-doping LaCrO3 coating with high emissivity and good mechanical property for enhancing high-temperature radiant heat dissipation

Microstructures and Phases of Ytterbium Silicate Coatings Prepared by Plasma Spray-Physical Vapor Deposition

Microstructure Analyses and Thermophysical Properties of Nanostructured Thermal Barrier Coatings

Influence of Spraying Power on Microstructure, Phase Composition and Nanomechanical Properties of Plasma-Sprayed Nanostructured Yb-silicate Environmental Barrier Coatings

Infrared radiation and thermal cyclic performance of a high-entropy rare-earth hexaaluminate coating prepared by atmospheric plasma spraying

Evolution of Microstructure, Thermophysical and Mechanical Properties and Wetting Behavior of Plasma-Sprayed Yb2O3 and Y2O3 Co-Stabilized ZrO2 Coatings During High-Temperature Exposure and CMAS Corrosion

Novel Thermal Barrier Coatings Based on Rare-Earth Zirconates/ysz Double-Ceramic-layer System Deposited by Plasma Spraying

Near Infrared Radiative Properties of Thermal Barrier Coatings

Plasma sprayed Yb4Hf3O12 thermal barrier coatings with excellent thermophysical properties and robust CMAS corrosion resistance

Formation Mechanism of an Ultra-Low Thermal Conductivity Thermal Barrier Coating Deposited Using Biomimetic Hierarchical Porous Microspheres

Microstructural evolution and thermal-physical properties of YTaO 4 coating after high-temperature exposure

Properties evaluation and failure behaviour of plasma sprayed Y4Hf3O12 for thermal barrier coating applications

Phase evolution, thermophysical and mechanical properties of high-entropy (Ce0.2Nd0.2Sm0.2Eu0.2Yb0.2)2Zr2O7 ceramic for advanced thermal barrier coatings

Calcium-magnesium-alumina-silicate (CMAS) resistant high entropy ceramic (Y0.2Gd0.2Er0.2Yb0.2Lu0.2)2Zr2O7 for thermal barrier coatings

High‐Temperature Aging of Plasma Sprayed Quasi‐Eutectoid LaYbZr2O7–Part II: Microstructure & Thermal Conductivity

Structure and Properties of Thermal Barrier Coating Prepared by Alumina Coated Zirconia Composite Powder

Highly Enhanced Infrared Spectral Emissivity of Porous CeO2 Coating