Abstract:To improve the efficiency of the system, a solar assisted heat pump (SAHP) evaporator could be used in conjunction with phase change slurry (PCS) as a working fluid for heat storage, transfer, and release. However, more research needs to be carried out on the state-of-the-art of dual -phase change coupled heat transfer between PCS and refrigerant. In order to explore coupled heat transfer and the influences on the upper and lower coupling interfaces of the horizontal evaporator pipe, a numerical heat transfer model that integrates phase change material capsule (PCMC) flow is applied. The ideal mixture of 15 vol% PCS with the particle size of 10 mu m was shown to increase heat transfer by 0.60 %-1.17 % and 1.14 %-1.69 % at the upper and lower coupling interfaces, respectively. As a consequence, an increase in PCS inflow rate and inlet vapor leads to an increase in the equilibrium concentration of PCMC near the lower coupling interface. Additionally, a decrease in heat transfer around 3.64 %-4.87 % was experienced when the inflow rate of PCS was increased from 0.2 m center dot s- 1 to 0.4 m center dot s- 1. When the initial volume fraction of vapor at the upper coupling interface increased from 0 vol% to 5 vol%, the heat transfer coefficient decreased from 329.44 W center dot m- 2 K-1 to 299.36 W center dot m- 2 K-1. Although the heat transfer reduction ratios at the lower coupling interface varied from 4.16 % to 4.51 %, they were still higher than those at the upper coupling interface. The study provides first findings and insights into the coupled heat transfer under consideration.

An Experimental Investigation on Performance of Microencapsulated Phase Change Material Slurry in Ground Heat Exchanger

Numerical Evaluation on the Flow and Heat Transfer Characteristics of Microencapsulated Phase Change Slurry Flowing in a Circular Tube

Thermo-fluidic performance of microencapsulated phase change material slurry in thermal energy storage

Thermal Performance of Microencapsulated Phase‐Change Slurry in a Circular Tube for Heat Storage

Flow and Heat Transfer Characteristics of Micro-encapsulated Phase Change Material Slurry and Energy Transport Evaluation

Numerical Flow Characteristics of Microencapsulated Phase Change Slurry Flowing in a Helically Coiled Tube for Thermal Energy Storage

Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in Laminar Flow under Constant Heat Flux

Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review

Numerical Investigation on Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in a Rectangular Minichannel

Dynamic Heat Transfer Characteristics Modeling of Microencapsulated Phase Change Material Slurries

Characterization of thermal and hydrodynamic properties for microencapsulated phase change slurry (MPCS)

An Overview of Phase Change Material Slurries: MPCS and CHS

Flow and heat transfer behaviors of phase change material slurries in a horizontal circular tube

Numerical Investigation on Thermal Performance of Ground Heat Exchangers Using Phase Change Materials As Grout for Ground Source Heat Pump System

Study on flow and heat transfer characteristics of Encapsulated Phase Change Material (EPCM) slurry in Double-Pipe Heat Exchanger

Thermal Performances Evaluation of a Flat‐plate Solar Collector Using Microencapsulated Phase‐change Slurry As Heat Transfer Medium

Thermal performance of microencapsulated phase change material slurry in helical coils with reversed loops and wire coil inserts

An Experimental Study of the Latent Functionally Thermal Fluid with Micro-Encapsulated Phase Change Material Particles Flowing in Microchannels

Heat-transfer characteristics of the two-phase-change process between a microencapsulated phase-change-material-slurry droplet and air: A numerical study

Flow and heat transfer characteristics of microencapsulated phase change material slurry in bonded triangular tubes for thermal energy storage systems

Exploration of Dual-Phase Change Coupled Heat Transfer in Solar Regenerative Evaporator