Abstract:Lignite is widely used as the fuel for coal-fired power plants, and its flue gas temperature is about 50-100 degrees C higher than others. V2O5-WO3/TiO2 is extremely restricted in the selective catalytic reduction (SCR) of NO from the coal-fired power plants burning lignite due to the drop of NOx conversion, low N-2 selectivity, and volatility of vanadium pentoxide at high temperatures. Therefore, a more environmental-friendly SCR catalyst with excellent SCR activity and better N-2 selectivity at 350-450 degrees C should be developed for this application. In this work, sulfated Fe-Ti spinel catalyst was developed for the SCR of NO from the coal-fired power plants burning lignite. The drop of NOx conversion at high temperatures was mainly related to the simultaneous occurrence of the catalytic oxidization of NH3 to NO during the SCR reaction. Ti was incorporated into gamma-Fe2O3 to decease the oxidization ability of Fe3+ on the surface, and the sites for -NH2 adsorption and the active components for -NH2 oxidization were separated after the sulfation to decrease the probability of the collision between -NH2 adsorbed and Fe3+ on the surface. They both inhibited the catalytic oxidization of NH3 to NO over gamma-Fe2O3. However, the SCR reaction over gamma-Fe2O3 was simultaneously restrained after the incorporation Ti and the sulfation. Therefore, NOx conversion over gamma-Fe2O3 at high temperatures depended on the ratio of NH3 conversion through the catalytic oxidization of NH3 to NO to that through the SCR reaction. This ratio decreased after the incorporation of Ti, and it further decreased after the sulfation, resulting in an obvious promotion of NOx conversion at high temperatures. Therefore, sulfated Fe-Ti spinel showed excellent SCR activity, N-2 selectivity, and H2O+SO2 durability at 300-450 degrees C, which was suitable for the application in the coal-fired power plants burning lignite.

Gd-Mn-Ti Composite Oxides Anchored on Waste Coal Fly Ash for the Low-Temperature Catalytic Reduction of Nitrogen Oxide

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Gd-modified Mn-Co oxides derived from layered double hydroxides for improved catalytic activity and H2O/SO2 tolerance in NH3-SCR of NOx reaction

Mn-Ce Oxide Nanoparticles Supported on Nitrogen-Doped Graphene for Low-Temperature Catalytic Reduction of NOx: De-Nitration Characteristics and Kinetics

Sm-modified Mn-Ce oxides supported on cordierite as monolithic catalyst for the low-temperature reduction of nitrogen oxides

Titania-Samarium-Manganese Composite Oxide for the Low-Temperature Selective Catalytic Reduction of NO with NH3

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Enhanced Selective Catalytic Reduction of NO with NH3 Via Porous Micro-Spherical Aggregates of Mn–Ce–Fe–Ti Mixed Oxide Nanoparticles

Cobalt doped Fe-Mn@CNTs catalysts with highly stability for low-temperature selective catalytic reduction of NOx

Ultralow-Temperature NOx Reduction over SmMn2O5 Mullite Catalysts Via Modulating the Superficial Dual-Functional Active Sites

Design of robust Co-doped Mn3O4 spinel catalysts for selective catalytic reduction of NO with NH3 at low temperatures

One-step Hydrothermal Synthesis of MnOx-CeO2/reduced Graphene Oxide Composite Aerogels for Low Temperature Selective Catalytic Reduction of NOx

Graphitic Carbon Nitride (G-C3n4) as a Super Support for Mn-Ce Based Nh3-Scr Catalyst: Improvement of Catalytic Activity and H2o/So2 Tolerance

Improvement of the Activity of Γ-Fe2o3 for the Selective Catalytic Reduction of NO with NH3 at High Temperatures: NO Reduction Versus NH3 Oxidization

Manganese Oxide Catalysts Supported on Zinc Oxide Nanorod Arrays: A New Composite for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Graphene Based Mesoporous Manganese-Cerium Oxides Catalysts:Preparation and Low-temperature Catalytic Reduction of NO

Promotional Mechanism of La-Mn-Fe Modification on Activated Coke for NH3-SCR of NOx at Low Temperatures

Novel Mn-Ce-Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH₃.

C,N ‐modified TiO 2 ‐supported Mn–Ce–Co x ‐based catalyst for low‐temperature NH 3 ‐SCR

Graphitic carbon nitride (g-C3N4) as a super support for Mn–Ce based NH3-SCR catalyst: Improvement of catalytic performance and H2O/SO2 tolerance for NO removal