Abstract:Submerged floating tunnel (SFT) is a new type of cable-supported structure system for strait crossing. Once the local anchor-cable suddenly fails, it will inevitably cause evident vibration and internal force redistributions of the structure. In order to study the dynamic responses and mechanical behaviors of the SFT subjected to abrupt anchor-cable breakage, a model test is conducted by a set of sensors installed on SFT for cable force, tube displacement and strain measurements. The transient dynamic signals following cable failure are tested and analyzed. Dynamic amplification factor (DAF) and dynamic coefficient (DC) are respectively used to evaluate the impact effect from the cable failure. Meanwhile, finite element simulations are also performed within ABAQUS. The establishments of the finished state of SFT before cable breakage and the dynamic cable failure process are presented both in the model test and FE model. Comparisons between the FE predicted values and the experimental results show a good agreement. On this basis, some influence factors are discussed in different cases of the cable-loss positions and the cable forces of ruptured cable, etc. The results show that the finished state of SFT under dead load (tube redundant buoyancy) after cable-force optimizations is more reasonable than that directly applying dead load without any cable-force adjustments, with more uniform cable force distribution and smaller tube deformation. Although the SFT suffers strong oscillations after sudden cable-breakage incident, no progressive collapse occurs when the safety margin of the rest structure is sufficient. The dynamic effect on remaining cable members due to sudden cable failure can be evaluated by DC method. A DC value of 1.5 is recommended to ensure the safety of SFT anchor-cables. When cable failure happens at the mid span of the tunnel, the deformation of SFT tube is most critical.

Research on Anchor Damage and Protection of Three-Core Composite Submarine Cable Considering Impact Angle

Field Test and Numerical Modeling of Submarine Photoelectric Composite Cable under Anchor Impact

Exploring Subsea Dynamics: A Comprehensive Review of Underwater Pipelines and Cables

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

Global Responses of Exposed and Suspended Submarine Cables Due to Anchor Dragging

Damage assessment for submarine photoelectric composite cable under anchor impact

Structure Damage Analysis of Photoelectric Composite Cable under Impaction by Admiral Anchors on Non-Rigid Bottom

Optimizing Grounding System Design and Loss Reduction Measures Analysis for Submarine Cable Landing Section

Dynamic Response Analysis for Submerged Floating Tunnel with Anchor-Cables Subjected to Sudden Cable Breakage

Field test research on failure of photoelectric composite submarine cable under impaction by dropped anchors

Quasi-static Three-Dimensional Analysis of Suction Anchor Mooring System

Mechanical Behaviors and Experimental Study of Submerged Floating Tunnel Subjected to Local Anchor-Cable Failure

Investigation on Dynamic Response of J-tube Submarine Cable Around Monopile Foundation

Research on Submarine Cable Anchor Damage Monitoring Technology Based on a Hybrid Brillouin and Rayleigh Distributed Sensing System

Study on numerical simulation and mechanical properties of anchor cable with C-shaped tube subjected to shearing

Dynamic Analysis of Submarine Cable During the Process of Laying Back to the Seabed

Review on Seabed Trenches Induced by Mooring Lines and Analyses of Anchor Bearing Capacity

Numerical Investigation of Burial Depth Effects on Tension of Submarine Power Cables

A case study on the seabed trenching assessment and anchor design in clay based on the hydrodynamic calculation of the floater

Systematic Monitoring of the Performance of Anchor Systems in Fractured Rock Masses

Simulation analysis of metal sheath and Armor loss of DC submarine cable based on COMSOL