Abstract:Ethylene-propylene-diene monomer (EPDM) is a key engineering material; its mechanical characterization is important for the safe use of the material. In this paper, the coupled effects of thermal degradation temperature and time on the tensile mechanical behavior of EPDM rubber were investigated. The tensile stress-strain curves of the aged and unaged EPDM rubber show strong nonlinearity, demonstrating especially rapid stiffening as the strain increases under small deformation. The popular Mooney–Rivlin and Ogden (N = 3) models were chosen to fit the test data, and the results indicate that neither of the classical models can accurately describe the tensile mechanical behavior of this rubber. Six hyperelastic constitutive models, which are excellent for rubber with highly nonlinearity, were employed, and their abilities to reproduce the stress-strain curve of the unaged EPDM were assessed. Finally, the Davis–De–Thomas model was found to be an appropriate hyperelastic model for EPDM rubber. A Dakin-type kinetic relationship was employed to describe the relationships between the model parameters and aging temperature and time, and, combined with the Arrhenius law, a thermal aging constitutive model for EPDM rubber was established. The ability of the proposed model was checked by independent testing data. In the moderate strain range of 200%, the errors remained below 10%. The maximum errors of the prediction results at 85 °C for 4 days and 100 °C for 2 and 4 days were computed to be 17.06%, 17.51% and 19.77%, respectively. This work develops a theoretical approach to predicting the mechanical behavior of rubber material that has suffered thermal aging; this approach is helpful in determining the safe long-term use of the material.

Study on the Property Characterization and Degradation of GIS O-ring Seals Under Thermal Compression Accelerated Aging

Research on aging and working life of material for GIS sealing O-rings

Study on aging of material for GIS sealing ring

A Three-Factor Accelerated Aging Test Platform of Thermal, Mechanical Compression, Pressured SF 6 , and a Leakage Test System for GIS O-Ring Seals

Experimental Evaluation of Aging Characteristics of EPDM As a Sealant for Undersea Shield Tunnels

Constitutive Model for Thermal-Oxygen-Aged EPDM Rubber Based on the Arrhenius Law

Long-term sealing performance evaluation and service life prediction of O-rings under thermal-mechanical coupling conditions

Multi-factor Aging Characteristics of GIS Solid Insulation: Effect of Electrical, Thermal and Vibration Stresses

Investigation of Time-Dependent Characteristics of EPDM Rubber Gasket Used for Shield Tunnels

The Effect of Thermal Aging on the Mechanical Properties of Ethylene Propylene Diene Monomer Charge Coating

Effect of Thermal Aging on Breakdown Strength of Epdm Rubber

The Change of Sealing Property in the Aging Process of NBR Sealing Equipment Based on Finite Element Analysis

Mechanical Properties of High Temperature Vulcanized Silicone Rubber Aged in the Natural Environment

The Multi-factor Aging Characteristics and Aging State Assessment of Epoxy Composites for GIS

Mechanical Behavior of Aged EPDM Insulation of High-Voltage Cable Joints in Thermal-Oxidative Environment

Analysis of Mechanical Properties and Mechanism of Natural Rubber Waterstop after Aging in Low-Temperature Environment

Thermal Oxidative Aging and Service Life Prediction of Commercial Ethylene–Propylene–Diene Monomer Spacer Damping Composites for High–Voltage Transmission Lines

Thermo-oxidative Aging Analysis of HTV Silicone Rubber Used for Outdoor Insulation

Study on the aging of three typical rubber materials under high- and low-temperature cyclic environment

Accelerated Aging Test and Study of Storage Life Prediction of NBR O-Ring

A rate-dependent aging constitutive model of EPDM rubber