Abstract:Rubber powder is widely used to modify base asphalt binder to improve the low-temperature performance and crack resistance of asphalt mixtures. This paper investigates the aging mechanism and performance evolution of rubber-modified asphalt in terms of three levels: rubber powder, rubber-modified asphalt, and rubber-modified asphalt mixture. The multilevel analysis results show that mass loss, phase transition, and melting occur during the process of rubber powder aging, and scanning electron microscope images indicate that the surface morphology of the rubber powder becomes smoother. The aging of base asphalt leads to the volatilization and oxidation of light components, resulting in the production of carbonyl and sulfoxide groups and a reduction in the swelling between the rubber powder and aged base asphalt. The aging of rubber powder leads directly to a significant decrease in the modification effect of the rubber; thus, rubber powder aging plays a more decisive role in the degradation of rubber-modified asphalt than base asphalt aging. By contrast, the performance indicators of aged rubber-modified asphalt are able to reach their highest values due to the effective blending between the rubber powder and base asphalt, which results in an enhanced antiaging capability. The sensitivity of all performance indicators of rubber-modified asphalt to the aging temperature is relatively low, except for the 5°C ductility index. Therefore, the mixing temperature needs to be strictly controlled to a specified value when rubber-modified asphalt is applied in cold areas that require low-temperature stability of the mixture. As for the aged rubber-modified asphalt mixture, the dynamic stability improved significantly, the ultimate tensile strain at low temperature decreased, and the antifatigue performance decreased to different extents under different stress ratios.

Analysis of Mechanical Properties and Mechanism of Natural Rubber Waterstop after Aging in Low-Temperature Environment

Study on the aging of three typical rubber materials under high- and low-temperature cyclic environment

Hygrothermal aging and water absorption behavior of radial tire composites

Experimental Investigations on the Dynamic Mechanical Properties of Aged Rubbers

Research on low temperature rheological behavior of aging resistant bitumen and mixture

Hydrothermal Aging Mechanisms of All-Steel Radial Tire Composites

Experimental study on mechanical property degradation of thermal aging laminated rubber bearing

The Change of Sealing Property in the Aging Process of NBR Sealing Equipment Based on Finite Element Analysis

Mechanical Properties of High Temperature Vulcanized Silicone Rubber Aged in the Natural Environment

Influence of Thermal Aging in Oil on the Friction and Wear Properties of Nitrile Butadiene Rubber

Study on Aging Evaluation Method of Silicone Rubber in Dongguan

Study on the influencing factors of natural degradation of liquid silicone rubber used for external insulation

The Deterioration of Foamed Silicone Rubber in Humid and Hot Environments

The Influence of Oil and Thermal Aging on the Sealing Characteristics of NBR Seals

Research status and prospect of wear and aging on hydraulic rubber sealing materials

Multiscale simulation on dynamic friction behavior of cylinder sealing rings under hydrothermal aging

Thermal Aging of Hydrogenated Nitrile Rubber – Loss of Additives and Its Influence on Elasticity Maintenance

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing

Multilevel Analysis of the Aging Mechanisms and Performance Evolution of Rubber-Modified Asphalt

Temperature effect on rubber gasket under high-frequency load

A Novel In-Situ Aging Evaluation Method by FTIR and the Application to Thermal Oxidized Nitrile Rubber