Abstract:Nylons are widely used as engineering plastics. When used as packaging materials for power system chips, the aging of nylons in the natural environment may cause package failure, reliability deterioration of chips, or even chip failure, and finally, lead to great loss in the power industry. Therefore, aging evaluation of nylons has attracted great attention. Conventional aging evaluation methods include natural weathering and artificial accelerated aging. Both of these two methods are time-consuming. Furthermore, the effects of various environmental factors on aging of nylons can not be investigated. In this paper a novel in-situ aging evaluation method was proposed and the corresponding system was developed to study nylon 6 (PA6) and nylon 66 (PA66)' s aging stability. The system can combine environmental factors such as irradiation, temperature, humidity and oxygen. By measuring the generation of gaseous degradation products during aging process of nylons, the stability can be compared. The results show that the gaseous degradation products of PA6 and PA66 are mainly H2O and CO2, and CO2 is used as an indicator to evaluate the aging status. Nylons with different natural pre-aging times were detected. Longer preaging time responds to more generations of CO2, demonstrating poorer stability. Furthermore, this method was applied to study the effect of humidity on the aging of PA6 and PA66. It was proved that humidity accelerates nylon aging, and high temperature further promotes this acceleration effect. The novel in-situ aging evaluation method can evaluate aging stability of nylons under versatile environmental factors in only several hours. It is also expected to be a powerful and promising aging evaluation method for other polymer materials.

A Novel In-Situ Aging Evaluation Method by FTIR and the Application to Thermal Oxidized Nitrile Rubber

Investigation of Crosslinking in the Thermooxidative Aging of Nitrile–butadiene Rubber

Studies On Thermo-Oxidative Aging Mechanism Of Natural Rubber By Two Dimensional Correlation Infrared Spectrum Method And The Standard Linear Solid Model

CHANGES OF CHEMICAL STRUCTURE AND MECHANICAL PROPERTY LEVELS DURING THERMO-OXIDATIVE AGING OF NBR

Effect Of Thermo-Oxidative Aging On Mechanical Properties And Tribological Behaviors Of Acrylonitrile-Butadiene Rubber

Application of Infrared Spectroscopy in Research on Aging of Silicone Rubber in Harsh Environment

Thermal Aging of Hydrogenated Nitrile Rubber – Loss of Additives and Its Influence on Elasticity Maintenance

Study on Aging Evaluation Method of Silicone Rubber in Dongguan

The evolution of microstructure of Styrene-Isoprene-Butadiene Rubber during the thermal-oxidative aging process using In-situ FTIR way

Systematic Investigation of the Degradation Properties of Nitrile-Butadiene Rubber/Polyamide Elastomer/Single-Walled Carbon Nanotube Composites in Thermo-Oxidative and Hot Oil Environments

Crack Initiation of Natural Rubber under High Temperature Fatigue Loading

Effect of lubricating oil on thermal aging of nitrile rubber

Thermal degradation of naturally aged NBR with time and temperature

A Novel Aging Evaluation System and the Application to Polyethylene Composites

Thermo-oxidative Aging Analysis of HTV Silicone Rubber Used for Outdoor Insulation

On the ageing behaviour of NBR: chemomechanical experiments, modelling and simulation of tension set

A Novel Aging Evaluation Method of Nylon

Thermo‐oxidative aging behavior and lifetime prediction of rubber latex foam with various natural‐to‐synthetic ratios

Accelerated Aging Test and Study of Storage Life Prediction of NBR O-Ring

The Effect of Thermo-Oxidation on the Continuous Stress Relaxation Behavior of Nitrile Rubber

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing