Abstract:The core‐shell structured mixture of zinc oxide and zinc stearate bloomed onto the surface of nitrile butadiene rubber after thermal aging 85°C for 130 days. The blooming process of mixtures was driven by the thermal stress generated in the reaction between zinc oxide and stearic acid. The decrease in elongation of the rubber was attributed to the blooming of Zn(St)2. The degradation of rubber performance in service environments is closely associated with the blooming behavior of additives in the rubber. This study investigates surface precipitates and changes in tensile properties of nitrile butadiene rubber (NBR) after storage at 85°C in air. The morphology, elemental composition, phase composition, and functional groups of the precipitates were analyzed by scanning electron microscopy, energy dispersion spectroscopy, X‐ray diffraction, and fourier transform infrared spectroscopy. Based on the morphology of internal rubber particles and precipitates and variations in the Zn/C mass ratio (ERZn), the reaction between zinc oxide and stearic acid in rubber under long‐term thermal environment was determined. Four stages of blooming for the mixture of zinc oxide and zinc stearate were inferred, and the impact of the blooming on the degradation of tensile properties of NBR was established. A dramatic decrease in the elongation at break (δk) of NBR was correlated with the blooming of zinc stearate and its correspondingly weakened plasticizing effect. Highlights The core‐shell structured mixture of ZnO and Zn(St)2 bloomed onto the surface of nitrile butadiene rubber. The ratio of mass percentages of Zn to C evaluated the blooming process of additives. The migration and blooming process of precipitates were divided into four stages. The decrease in elongation of the rubber was attributed to the blooming of Zn(St)2.

The Effect of Thermo-Oxidation on the Continuous Stress Relaxation Behavior of Nitrile Rubber

Investigation of Crosslinking in the Thermooxidative Aging of Nitrile–butadiene Rubber

A Simulation Study about the Effects of Temperature on Compression Stress Relaxation for Natural Rubber (NR)

Compressive Stress Relaxation Modeling of Butadiene Rubber under Thermo‐oxidative Aging

Studies On Thermo-Oxidative Aging Mechanism Of Natural Rubber By Two Dimensional Correlation Infrared Spectrum Method And The Standard Linear Solid Model

Thermal Aging of Hydrogenated Nitrile Rubber – Loss of Additives and Its Influence on Elasticity Maintenance

CHANGES OF CHEMICAL STRUCTURE AND MECHANICAL PROPERTY LEVELS DURING THERMO-OXIDATIVE AGING OF NBR

Unusual low temperature relaxation behavior of crosslinked acrylonitrile-butadiene co-polymer

Effect of lubricating oil on thermal aging of nitrile rubber

Relationship between stress relaxation behavior and thermal stability of natural rubber vulcanizates

Effect Of Thermo-Oxidative Aging On Mechanical Properties And Tribological Behaviors Of Acrylonitrile-Butadiene Rubber

A Novel In-Situ Aging Evaluation Method by FTIR and the Application to Thermal Oxidized Nitrile Rubber

Crack Initiation of Natural Rubber under High Temperature Fatigue Loading

Effect of non-rubber components on the crosslinking structure and thermo-oxidative degradation of natural rubber

Investigation on the blooming behavior of additives in nitrile butadiene rubber at elevated temperature

A simple stress relaxometer and its use with vulcanized nitrile rubber/PVC compounds

Stress Relaxation Behavior of Nylon 1010

Special Features of Relaxation Properties of Elastomer Compositions with Highly Dispersed Carbon Additives

Thermal‐oxidative aging behavior of graphene and graphene oxide‐filled nitrile butadiene rubber: A molecular simulation approach

Relationship between structure and damping property of hydrogenated nitrile rubber

The effect of strain rate on the tensile properties of nitrile butadiene rubber with dual crosslinked networks