Abstract:Brominated isobutyl-isoprene rubber/clay nanocomposite (BIIRCN) and ethylene-propylene-diene-monomer rubber/clay nanocomposite (EPDMCN) were prepared by melt blending. The micro-structural evolution of these two kinds of rubber/clay nanocomposites (RCNs) with vulcanization process was investigated using wide-angle X-ray diffraction (WAXD) and transmission electron microscope (TEM). The WAXD results revealed that the intercalated structure of organically modified clay (OMC) changed throughout the whole curing process. The intercalated structure kept on changing beyond the vulcanization stage of T(90). The interlayer space of intercalated silicate in uncured BIIRCN is larger than that in uncured EPDMCN. However, the intercalated structure for EPDMCN changed by a larger extent than that for BIIRCN during the vulcanization process, and the interlayer space of the intercalated structure is larger in the cured EPDMCN than that in the cured BIIRCN. It was found that the intercalant (i.e., octadecylamine, ODA) for OMC could shorten the scorch time of the curing reaction, and increase the curing rate, which was attributed to the further intercalation during vulcanization. TEM results indicated that the spatial distribution of OMC is much better in BIIR (a polar rubber matrix) than that in EPDM (a non-polar rubber matrix). The changes in spatial dispersion structure during vulcanization for EPDMCN and BIIRCN show different trends. In conclusion, the polarity of the rubber is the determining factor influencing the evolution of both the intercalated structure and the spatial dispersion of clay during vulcanization.

The influence of montmorillonite on the anti-reversion in the rubber-clay composites

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

Influence of clay and interfacial agent on structure and properties of natural rubber nanocomposites by emulsion intercalation

Effect of Polyethylene Glycol-Intercalated Organoclay on Vulcanization Characteristics and Reinforcement of Natural Rubber Nanocomposites

Effect of the clay on the thermal stability and mechanical properties of Nitrile-Butadiene Rubber (NBR)/clay nanocomposites

Influence of organic modifier structures of 2D clay layers on thermal stability, flammability and mechanical properties of their rubber nanocomposites

Effects of Characteristics of Rubber, Mixing and Vulcanization on the Structure and Properties of Rubber/Clay Nanocomposites by Melt Blending

Micro-structural evolution of rubber/clay nanocomposites with vulcanization process

Remarkable Reinforcement of Natural Rubber by Deformation-Induced Crystallization in the Presence of Organophilic Montmorillonite

Studies on NBR-ZDMA-OMMT Nanocomposites Prepared by Reactive Mixing Intercalation Method

Structure and properties of natural rubber nanocomposites containing organo-montmorillonite bearing carboxyl groups

Improved Resistance to Crack Growth of Natural Rubber by the Inclusion of Nanoclay

Prepared Hydrogenated Nitrile Rubber (hnbr)/organo–montmorillonite Nanocomposites by the Melt Intercalation Method

Preparation and properties of NR/montmorillonite nanocomposites

Cure kinetics and morphology of natural rubber reinforced by the in situ polymerization of zinc dimethacrylate

Influence of Fe-MMT on crosslinking and thermal degradation in silicone rubber/clay nanocomposites

Preparation and Characterization of NR/Solid-State Modified Montmorillonite Nanocomposites

A COMPARISON BETWEEN VULCANIZATION AGENTS FOR PREPARATION OF EPDM/MONTMORILLONITE NANOCOMPOSITES

Influence of Clay Modification on the Structure and Mechanical Properties of Epdm/Montmorillonite Nanocomposites

Preparation, structure and properties of nitrile–butadiene rubber–organoclay nanocomposites by reactive mixing intercalation method

The Role of Rubber Characteristics in Preparing Rubber/Clay Nanocomposites by Melt Compounding