Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Effect of Low Molecular Weight Melamine-Urea-formaldehyde Resin Impregnation on Poplar Wood Pore Size Distribution and Water Sorption

Mechanical and Water Soaking Properties of Medium Density Fiberboard with Wood Fiber and Soybean Protein Adhesive.

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

EFFECT OF MODIFICATION WITH MELAMINE–UREA–FORMALDEHYDE RESIN ON THE PROPERTIES OF EUCALYPTUS AND POPLAR

Curing characteristics of low molecular weight melamine-urea–formaldehyde (MUF) resin-impregnated poplar wood

EFFECTS OF MODIFICATION WITH MELAMINE–UREA–FORMALDEHYDE RESIN ON THE PROPERTIES OF UREA PRETREATED EUCALYPTUS

Effect of High-pressure Densification on Moisture Sorption Properties of Paulownia Wood

The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions

MOISTURE SORPTION ISOTHERMS AND ISOSTERIC HEATS OF SORPTION OF HIGH-PRESSURE TREATED PAULOWNIA WOOD UNDER DIFFERENT STORAGE CONDITIONS

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Effects of molecular weight of urea–formaldehyde resins on wettability and adhesion at wood surface, interphase, and plywood

Thermal Behavior Analysis of Melamine Modified Urea-Formaldehyde Resin with Different Molar Ratios

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

The hydrolytic stability and structure of the cured melamine-urea-formaldehyde resin

Nano-Silica/Urea-Formaldehyde Resin-Modified Fast-Growing Lumber Performance Study

Characterization of urea–formaldehyde resin penetration into medium density fiberboard fibers

Melamine–Urea–Formaldehyde Resin Adhesive Modified with Recycling Lignin: Preparation, Structures and Properties

Bonding Performance of Melamine-Urea-formaldehyde and Phenol-Resorcinol-formaldehyde Adhesives in Interior Grade Glulam

INVESTIGATION OF DECAY RESISTANCE OF ALKALINE COPPER, UREA-FORMALDEHYDE, AND PHENOL -FORMALDEHYDE RESINS

EFFECT OF CMC FORMIC ACID SOLUTION ON BONDING PERFORMANCE OF MUF FOR INTERIOR GRADE GLULAM