Abstract:Various factors, such as molecular weight (MW), reactivity, wettability, surface roughness, surface adhesion, interphase adhesion, and cohesion of adhesives, affect the adhesion strength of urea–formaldehyde (UF) resins when bonding wood. This study was conducted to understand the MW effects of UF resins on wettability and adhesion at wood surface, interphase, and plywood. UF resins with two formaldehyde/urea (F/U) molar ratios (1.0 and 1.6) and three MW levels such as low-MW (L-MW), middle-MW (M-MW), and high-MW (H-MW) were evaluated for their wettability and adhesion. As the MW increases, the surface tension of 1.0 UF resins slightly increased, while that of 1.6 UF resins slightly decreased. The contact angle of UF resins on earlywood and latewood either from sapwood or heartwood (Radiata pine: Pinus radiata D. Don) before and after the extractive removal was dependent on the wood surface roughness rather than on the MWs of resins, showing a weak negative linear relationship with the surface roughness. The maximum surface adhesion force of 1.0 UF resins was greater at latewood than earlywood from sapwood before the extraction, but it decreased after the extractive removal. 1.0 UF resins showed the highest interphase adhesion at H-MW level, whereas 1.6 UF resins gave the strongest interphase adhesion at M-MW level although 1.6 UF resins had greater interphase adhesion than those of 1.0 UF resins for sapwood and heartwood. However, tensile shear strength of plywood did not proportionately relate to the wettability, surface adhesion, and interphase adhesion of UF resins. These results suggest that the MW, wettability, and surface adhesion of UF resins are indirectly related to interphase adhesion and adhesion strength in wood bonding.

Effects of molecular weight of urea–formaldehyde resins on wettability and adhesion at wood surface, interphase, and plywood

Mechanical and Water Soaking Properties of Medium Density Fiberboard with Wood Fiber and Soybean Protein Adhesive.

Bonding Performance of Melamine-Urea-formaldehyde and Phenol-Resorcinol-formaldehyde Adhesives in Interior Grade Glulam

Direct measurement of surface adhesion between thin films of nanocellulose and urea–formaldehyde resin adhesives

Post-modification of ultra-low molar ratio urea-formaldehyde adhesive with different types and levels of organic acid hardener

Investigation of Novel Thermosetting Copolymer-Based Monomethylolurea-Glyoxal for Wood Manufacturing

Study on structure and properties of glyoxal-urea-formaldehyde copolycondensation resin

Effect of chitosan-epoxy ratio in bio-based adhesive on physical and mechanical properties of medium density fiberboards from mixed hardwood fibers

Adhesion properties and formaldehyde emissions of MnO2/UF nanocomposite adhesives

EFFECT OF CMC FORMIC ACID SOLUTION ON BONDING PERFORMANCE OF MUF FOR INTERIOR GRADE GLULAM

Preparation and characterization of a novel environment-friendly urea-glyoxal resin of improved bonding performance

Relationship between thermal curing behavior and bond strength development in formaldehyde-based resins with different molecular weights

Low Mole Ratio UF and UMF Resins Entailing Uron-Type Methylene-Ether Groups and their Low Formaldehyde Emission Potentials

Characterization of urea–formaldehyde resin penetration into medium density fiberboard fibers

EFFECTS OF MODIFICATION WITH MELAMINE–UREA–FORMALDEHYDE RESIN ON THE PROPERTIES OF UREA PRETREATED EUCALYPTUS

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

Modification of urea-formaldehyde resin adhesives with oxidized starch using blocked pMDI for plywood

Preparation of Environmentally Friendly Urea-Hexanediamine-Glyoxal (HUG) Resin Wood Adhesive

The impact of altering the molar ratio on formaldehyde content and the physical and mechanical properties of MDF panels

Partial replacement of urea-formaldehyde adhesive with fungal biomass and soy flour in plywood fabrication

Effect of Novel FUDMA-TEGDMA Resin on Resin-Dentine Adhesion Strength