Abstract:To investigate structural changes, the Cu95Fe5 alloy system was subjected to cooling rates of 1 × 1013 K/s, 2 × 1012 K/s, 2 × 1011 K/s, and 2 × 1010 K/s using the molecular dynamics simulation method. The results revealed that decreasing the cooling rate caused an increase in the phase transition temperature. Further, the structure of the alloy system exhibited a tendency towards increased stability following cooling at lower cooling rates. The Fe precipitation behavior of the Cu95Fe5 alloys during cooling at the rate of 2 × 1010 K/s was further explored, with the results suggesting that the formation and growth of the Fe cluster is a continuous process governed by the nucleation and growth mechanism. The size and number of Fe clusters formed at different stages were found to be affected by three factors, namely, the interaction force between the Fe atoms, the diffusion ability of the Fe atoms, and the interfacial energy between the Fe cluster and Cu matrix. When the alloy temperature exceeded 1400 K, the accumulation of the Fe atoms was facilitated by their strong interaction. However, the high temperatures and the large diffusion coefficient of the Fe atoms acted as inhibitors to the growth of Fe clusters, despite the intense thermal activities. As the temperature was reduced from 1400 K to 1050 K, the Fe atoms moved with a reduced intensity in a narrower area, and both the number of Fe atoms in the largest cluster and the number of clusters increased due to the action of the interaction force between the Fe atoms. Upon lowering the temperature from 1050 K to 887 K, the size of the largest Fe cluster increased rapidly, while the number of clusters decreased gradually. The growth of the largest Fe cluster could be partly attributed to the diffusion of single Fe atoms into the cluster under the action of the interaction force between the Fe atoms, in addition to the gathering and combination of multiple clusters. When the temperature was lowered from 967 K to 887 K, the diffusion coefficient of the Fe atoms approached 0, indicating that the non-diffusive local structure rearrangements of atoms dominated in the system structure change process. The interface energy governed the combination of the Fe clusters in this stage. At a temperature below 887 K, the alloy crystallized, the activities of the Fe atoms were reduced due to a low temperature, and the movement range of the Fe atoms was small at a fast cooling rate. As such, both the size and number of Fe clusters showed no obvious changes.

Structural and Thermodynamic Behaviors of CumAgn (m + N = 144–147) Nanoalloys During Cooling: Implications for Nanoparticle Structure Control

The composition effect on the structural and thermodynamic properties of Cu-Ag-Au ternary nanoalloys: A study via molecular dynamics approach

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Composition- and Temperature-Dependent Liquid Structures in Al–Cu Alloys: Anab Initiomolecular Dynamics and X-Ray Diffraction Study

Morphology and mechanical properties of nanocrystalline Cu/Ag alloy

Oscillatory surface tension due to finite-size effects.

Research on homogeneous nucleation and microstructure evolution of aluminium alloy melt

Intelligent Service Management - Technologies and Perspectives

Atomic Insights into the Sintering Behaviour of Ag-Cu Solid Solution Nanoparticles on Ag Substrate

Mechanical characterization of nanocrystalline Cu-Ag alloys subjected to shear deformation

Molecular Dynamics Simulation of the Coalescence and Melting Process of Cu and Ag Nanoparticles

Investigation of alloying process of Cu and Au nanoparticles based on molecular dynamics simulation

Structural Stability and Homogeneity of the Nonequilibrium Co–Ag Alloys

MOLECULAR DYNAMICS SIMULATION OF MICROSTRUCTURAL CHANGE OF Cu0.6Ni0.2Fe0.2 ALLOY DURING THE COOLING PROCESS

Influence of Mn Addition on the Evolution of Precipitates in Al-Cu Alloys

Effect of Cu on Nanoscale Precipitation Evolution and Mechanical Properties of a Fe-NiAl Alloy.

On the Evolution of Nano-Structures at the Al–Cu Interface and the Influence of Annealing Temperature on the Interfacial Strength

Molecular Dynamics Research on Fe Precipitation Behavior of Cu95Fe5 Alloys during Rapid Cooling

Structural Evolution and Dynamical Properties of Al2Ag and Al2Cu Liquids Studied by Experiments and Ab Initio Molecular Dynamics Simulations

Copper oxide superconductors: A distinguishable thermodynamic state.

Molecular Dynamics Study of Stability of Solid Solutions and Amorphous Phase in the Cu-Al System