Abstract:The vibration performance of centrifugal impellers is important for pumps and hydraulic excitation is a key source of vibration. The complex internal secondary flow in the centrifugal impeller brings degradation on vibration performances. An attempt of optimization by controlling the thickness distribution of centrifugal impeller blade is given to repress the internal secondary flow and alleviating vibration. The usual method of modifying an impeller on vibration performance is applying splitter blades. In this study, an ordinarily designed impeller is improved by the optimization attempt and the optimized impeller (OPT) is compared with the prototype impeller (PRT) with traditional splitter blades. The vibration performances of the impellers, the PRT, the ordinary impeller (ODN), and the OPT, are investigated numerically and experimentally. Meanwhile, further study on the influence of the thickness distribution optimization on vibration is conducted. There is a relative velocity gradient from suction side (SS) to pressure side (PS) in impeller ODN, causing nonuniformity of energy distribution. By means of thickness distribution optimization, the impeller blade angle on the PS and SS along the blade-aligned streamwise location is, respectively, modified and therefore the flow field can be reordered. The energy transfer in impeller is also redistributed after the modification of blade thickness distribution. What is more, experimental research upon impeller PRT and impeller OPT is also complemented to support the computational fluid dynamics (CFD) results. The experimental results show that the hydraulic performance of the impellers basically agree with the CFD results and the vibration data also proves a better vibration performance of the OPT.

Effect of Under-Platform Dampers on the Forced Vibration of High-Speed Rotating Blades

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Experimental Study on Vibration Characteristics of Blade with New Damping Structure

Multi-source uncertainty propagation and sensitivity analysis of turbine blades with underplatform dampers

Analysis on vibration reduction of a rotating dovetailed blade with underplatform damper and installation preload

Numerical Simulation and Test for a Turbine Damper

Calculation of Damping Ratio and Analysis of Damping Effect of Turbine Blade Dry Friction Damper in Rotating State

Numerical and Experimental Study on Dummy Blade with Underplatform Damper

EXPERIMENTAL INVESTIGATION OF THE DYNAMIC CHARACTERISTICS OF THE DAMPED BLADE

Experimental Study on Vibration Characteristics of Dry Friction Damping of Turbine Blade with Integral Shroud

Experimental Friction Damping Characteristic Of A Steam Turbine Blade Coupled By Shroud And Snubber At Standstill Set-Up

Mitigation of In-Plane Vibrations in Large-Scale Wind Turbine Blades with a Track Tuned Mass Damper

Wind Vibration and Vibration Reduction of a H-Rotor Type Three-Bladed Vertical Axis Wind Turbine

Optimization of a Centrifugal Impeller on Blade Thickness Distribution to Reduce Hydro-Induced Vibration

The Vibration Characteristics of Steam Turbine Blades with New Friction Damping Structures

Dynamical Behaviors of Hybrid Squeeze Film Damper for Rotor System Vibration Control

Experimental Study of Dynamic Characteristics of Dry Friction Damping of Turbine Blade Steel

Investigation of Vibration Characteristics for Dry Friction Damped Blades with High-fidelity Finite Element Model

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Study for the Optimal Design of the Vibration Characterist ics of Damped Blades

Experimental and Numerical Quantification of the Aerodynamic Damping of a Turbine Blisk