Abstract:Functional gradient materials (FGM), with their composition gradually varied in different positions, have attracted much attention for research and development during the years. Normally there are two types of functional gradient materials: one without the formation of intermetallics which is easier for fabrication due to less scientific and technological challenge; the other one with the formation of intermetallics in some part of the gradient changed composition range such as Ti-Al, Ti-Fe, Ni-Al gradient materials, which still exists big challenge on intermetallic, resulting in high brittleness and unavailability.Laser deposition is a competitive candidate for FGM due to its capability on accurate composition and precise dimension control. According to an aeronautical application requirement to gradually change the composition from Ti6Al4V to 316L, this paper reports on laser deposition of Ti6Al4V to 316L gradient composition structure. A big challenge is the formation of the TiFe intermetallic especially near the composition of Ti50Fe50, which results in very high cracking tendency. Many efforts have been made to optimize the Ti-Fe composition ratio, the deposition process and the deposition parameters, not a single Ti6Al4V-316L composition gradient structure was successful due to the formation of the very brittle TiFe and TiFe2 intermetallics. This indicates that it is almost impossible to direct deposit Ti6Al4V to 316L without cracking and separation. We used Inconel 625 powder as an interlayer between the Ti6Al4V and the 316L, thus a sound Ti6Al4V-316L composition gradient structure was successfully achieved by laser deposition. The brittle TiFe and TiFe2 intermetallics were replaced by a series of phase evolutions: α+β → β+Ti2Ni→Ti2Ni+TiNi→TiNi→TiNi+TiNi3→Ni3Fe→ Ni2Fe3→γFe. The brittleness was dramatically decreased or diluted and crack-free composition gradient structure was available. The gradient structure was further analyzed on hardness, microstructural evolution, the Young's modulus and Poisson's ratio.

Additive Manufacturing of Ti-Al Functionally Graded Material by Laser Based Directed Energy Deposition

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Microstructure and mechanical properties of Ti60–Ti 2 AlNb functionally graded materials fabricated by laser directed energy deposition

Dilution of Al and V Through Laser Powder Deposition Enables a Continuously Compositionally Ti/Ti6Al4V Graded Structure

Laser deposition of graded -TiAliTi<sub>2</sub>AlNb alloys: Microstructure and nanomechanical characterization of the transition zone

Microstructure and Properties of Ti/Al Lightweight Graded Material by Direct Laser Deposition

Alloying Strategies for Additive Manufacturing of Ti6Al4V Based Alloys, Composites and Functionally Graded Materials: Microstructure and Phase Evolution of Intra and Inter-Layer

Microstructure evolution and reaction mechanism of continuously compositionally Ti/Al intermetallic graded material fabricated by laser powder deposition

Fundamental Study of In-Situ Strengthening and Formation of Continuous Gradient Titanium Alloys via Laser Directed Energy Deposition

Intermetallic Phases Transition Mechanism of the Interface of Ti6Al4V-Inconel718 Graded Material by Laser Additive Manufacturing

Research Progress on Additive Manufacturing TiAl Alloy

Laser Metal Deposition of Ti6Al4V—A Brief Review

Compositional Changes and Microstructure Evolution of Ti6Al4V-Inconel718 Functionally Graded Materials by Laser Additive Manufacturing

Additive Manufactured Ti-6Al-4V Alloy with Graded Micro-structure by Selective Laser Melting

Hybrid Fabrication of Cold Metal Transfer Additive Manufacturing and Laser Metal Deposition for Ti6Al4V: The Microstructure and Dynamic/Static Mechanical Properties

Nanoscale engineering of low-misfit TiB 2 /Al 3 (Sc,Zr)/α-Al multi-interface to improve strength-ductility synergy for direct energy deposited aluminum alloy

Interfacial Microstructure and Stress Characteristics of Laser-Directed Energy Deposited AA2024 on Ti6Al4V Substrate

Nanoscale Engineering of Low-Misfit TiB2/Al3(Sc,Zr)/α-Al Multi-Interface to Improve Strength-Ductility Synergy for Direct Energy Deposited Aluminum Alloy

In Situ Alloying Based Laser Powder Bed Fusion Processing of Β Ti–Mo Alloy to Fabricate Functionally Graded Composites

Laser Deposition of Ti6Al4V-316L Composition Gradient Structure: Challenge on Intermetallics

Mechanism of grain refinement and mechanical property enhancement of Ti-45Al-8Nb alloy by directed laser deposition