Abstract:The decrease of both friction and wear is very crucial for reducing oil consumption and the associated environmental pollution. Accordingly, the search continues for novel materials, coatings, lubricants, and systems constituted by the aforementioned ones that can potentially reduce friction and wear. In this paper, a solid-liquid composite lubrication system was constituted by combining g-C3N4 nanosheets as the lubricating oil additives with Ti-DLC film, to achieve a green lubricant providing extreme anti-wear and friction reduction functionality. Tribological properties of the composite lubrication system with different concentrations of g-C3N4 were evaluated using a ball-on-disc sliding friction tester at different normal loads. The results show that both the friction coefficient and wear rate first decreases and then increases with the increase of the g-C3N4 concentration. The lubricant with 1 wt% g-C3N4 exhibits the optimal lubricant property with the friction coefficient of 0.076, 0.078 and 0.082, reducing by nearly 24%, 20%, and 12% compared with base oil for the normal loads of 50 N, 100 N, and 200 N, respectively. However, further increase in the concentration of g-C3N4 results in significant increase in the friction and wear of the tracks. The wear rates show no marked variation with the increasing load, indicating that g-C3N4 nanosheets possess a wide load adaptation range in wear-resistance. As environmentally friendly oil additives, g-C3N4 nanosheets can effectively improve the tribological property of the composite lubrication system. Based on the characterizations of both the Ti-DLC film and wear scars by SEM, XPS, non-contact 3D surface profiler and EDS, the synergistic lubrication mechanism of the g-C3N4 nanosheets and Ti-DLC film is also proposed.

Mass-Produced Cu Nanoparticles As Lubricant Additives to Enhance the Tribological Properties of DLC Coatings

The tribological performance of W-DLC in solid–liquid lubrication system addivated with Cu nanoparticles

Preparation and Tribological Properties of Surface-Capped Copper Nanoparticle as a Water-Based Lubricant Additive

Effect of lubricant additives of Cu, Fe and bimetallic CuFe nanoparticles on tribological properties

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Tribological Behaviors of Diamond-Like Carbon Coatings on Plasma Nitrided Steel Using Three BN-containing Lubricants

Preparation and Tribological Properties of Copper Nanoparticles As Lubricant Additive

Pd nanoparticles lubricant additive catalyze the construction of carbon-based tribofilm to reduce graphitization-induced wear of DLC films under boundary lubrication

Copper phosphate nanosheets as high-performance oil-based nanoadditives: tribological properties and lubrication mechanism

Effect of copper oxide@boron nitride nanosheet hybrid nanocomposite on tribological properties of paraffin liquid

Graphitic Encapsulation and Electronic Shielding of Metal Nanoparticles to Achieve Metal-Carbon Interfacial Superlubricity.

Combining Carbon Nanoparticle Coatings and Laser Surface Texturing for Enhanced Lubricity Under High Loads

Green Oil Additive G-C3n4: a Feasible Strategy to Enhance the Tribological Properties of DLC Film

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Synergistic effect of graphene and nanodiamonds to achieve ultra-low friction on rough DLC coatings

In situ preparation of Cu-Mo-S nanoparticle additive with multi-functional tribological properties

In-situ synthesis of Cu2S nanoparticles to consolidate the tribological performance of PAI-PTFE bonded solid lubricating coatings

Nanosized Copper Powders Prepared by Gel-Casting Method and Their Application in Lubricating Oil

Preparation,Characterization of Oil-soluble Copper Nanoparticles and the Tribological Property as Additive in SF15W/40 Lubricating Oil

Study on the Lubrication Mechanism of Diamond-Like Carbon Coating in Two Formulated Lubricants with Two Viscosity Grades

Enhancement of tribological properties by dynamic mixing of diamond-like carbon/Mo films on steel