Abstract:Metallurgical bonding between immiscible system AZ31B magnesium (Mg) and Ti-6Al-4V titanium (Ti) was achieved by adding Cu interlayer using laser welding-brazing process. Effect of the laser power on microstructure evolution and mechanical properties of Mg/Cu-coated Ti joints was studied. Visually acceptable joints were obtained at the range of 1300 to 1500 W. The brazed interface was divided into three parts due to temperature gradient: direct irradiation zone, intermediate zone and seam head zone. Ti 3 Al phase was produced along the interface at the direct irradiation zone. Ti-Al reaction layer grew slightly with the increase in laser power. A small amount of Ti 2 (Cu,Al) interfacial compounds formed at the intermediate zone and the ( α -Mg + Mg 2 Cu) eutectic structure dispersed in the fusion zone instead of gathering when increasing the laser power at this zone. At the seam head zone, Mg-Cu eutectic structure was produced in large quantities under all cases. Joint strength first increased and then decreased with the variation of the laser power. The maximum fracture load of Mg/Cu-coated Ti joint reached 2314 N at the laser power of 1300 W, representing 85.7% joint efficiency when compared with Mg base metal. All specimens fractured at the interface. The feature of fracture surface at the laser power of 1100 W was characterized by overall smooth surface. Obvious tear ridge and Ti 3 Al particles were observed at the fracture surface with increase in laser power. It suggested atomic diffusion was accelerated with more heat input giving rise to the enhanced interfacial reaction and metallurgical bonding in direct irradiation zone, which determined the mechanical properties of the joint.

Microstructure and Mechanical Properties of Laser Welded Magnesium Alloy/Steel Joint Using Cu-Si Composite Interlayer

Influence of Laser Power on the Microstructure and Mechanical Properties of a Laser Welded-Brazed Mg Alloy/Ni-Coated Steel Dissimilar Joint

Influence of Al Interlayer Thickness on Laser Welding of Mg/Steel

Effect of Alloying Elements in Steels on the Interfacial Structure and Mechanical Properties of Mg to Steel by Laser-GTAW Hybrid Direct Lap Welding

Interfacial structure of the joints between magnesium alloy and mild steel with nickel as interlayer

Influence of Al Interlayer Thickness on Laser Welding of Mg / Steel The impact of different Al interlayer thicknesses on interfacial reactions and mechanical properties during laser welding of Mg to steel was investigated

Effects of Copper Addition on Microstructure and Strength of the Hybrid Laser-Tig Welded Joints Between Magnesium Alloy and Mild Steel

Investigation on welding mechanism ana interlay er selection of magnesium/steel lap joints

Laser Welding-Brazing of Immiscible AZ31B Mg and Ti-6Al-4V Alloys Using an Electrodeposited Cu Interlayer

Strengthening effect of nickel and copper interlayers on hybrid laser-TIG welded joints between magnesium alloy and mild steel

Microstructural Characteristics and Mechanical Properties of Fiber Laser Welded-Brazed Mg Alloy-Stainless Steel Joint

Effect of Si Content on the Interfacial Reactions in Laser Welded-Brazed Al/steel Dissimilar Butted Joint

Microstructure of Dissimilar Metal Joint with Magnesium Alloy AZ31B and Steel 304 for Laser-Tungsten Inert Gas Lap Welding

Interfacial Microstructure and Fracture Behavior of Laser Welded–brazed Mg Alloys to Zn-coated Steel

Effect of laser power on microstructure and mechanical properties of laser heat conduction lap welded joint between AZ31B magnesium alloy and DP780 galvanized steel

Comparative study on microstructure and mechanical properties of laser welded–brazed Mg/mild steel and Mg/stainless steel joints

The Effect of Alloying Elements on the Shear Strength of the Lap Joint of AZ31B Magnesium Alloy to Q235 Steel by Hybrid Laser-TIG Welding Technique

Microstructure and Mechanical Properties of Laser Fusion Welded Al/steel Joints Using a Zn-based Filler Wire

Influence of Electrodeposited Cu-Ni Layer on Interfacial Reaction and Mechanical Properties of Laser Welded-Brazed Mg/Ti Lap Joints

Laser welding-brazing of Mg to stainless steel: joining characteristics, interfacial microstructure, and mechanical properties

Investigation of interfacial microstructure and connection mechanism of magnetic field-assisted magnesium/aluminum laser welding joint