Abstract:Inductively coupled plasma generator is one of the core components of the near-space high-speed target plasma electromagnetic scientific experimental research device, which is often used to simulate high enthalpy and high speed plasma sheath environment. In order to study the discharge characteristics of inductively coupled plasma generator under high power, radio frequency and medium pressure, the numerical simulation and experiment are combined to study its internal heat transfer and flow characteristics in this paper. Based on the local thermodynamic equilibrium conditions, the numerical simulation of large-scale radio frequency and medium pressure inductively coupled plasma with a power of 100–400 kW is carried out through the multi-field coupling of flow, electromagnetic and temperature field, and verified by light intensity and spectrum experiment. The results show that the electromagnetic field distribution in the high-power thermal balance inductively coupled plasma generator is similar to that of the small- and medium-sized power plasma generator. The discharge energy dissipation occurs mainly in the area where the induction coil is located. The temperature of the inner wall of the quartz tube is higher at the coil location than in other areas, and the plasma has a ring-shaped high-temperature structure. The outer wall of the quartz tube is set to be the boundary condition of heat flux for simulating the temperature change of the quartz tube under cold blowing. This setting is in coincidence with factual situations. The wall temperature of the quartz tube at the entrance and at the induction coil section are found to be relatively high. When the large-size inductively coupled plasma generator works, an obvious return vortex is generated at the entrance due to the temperature difference and the electromagnetic pumping effect, and the exit velocity increases slightly with the increase of power. At the same time, the discharge experiment under the corresponding conditions shows that there is found a ring structure with bright edges and dark centers in the axial image of the argon discharge. Moreover, the emission spectrum of argon plasma is measured through the spectrum diagnosis system and the spatial distribution of the generator electron temperature is obtained. The light intensity of the discharge image and the electron temperature measured by the spectrum are found to be in comparative coincidence with the COMSOL simulation temperature result, demonstrating the validity of the numerical simulation results under thermodynamic equilibrium conditions. The numerical simulation results in this paper are also applicable to the optimization design and temperature resistance evaluation of the inductively coupled plasma generator.

Electrical and Optical Test of a Semi-Combustible Plasma Generator Via a Plasma Ignition Simulator

Pulsed Discharge Characteristics of a Semicombustible Plasma Generator for ETC Launchers

Mechanism of Plasma Ignition in Electrothermal-Chemical Launcher

Simulation of Two-Dimensional Interior Ballistics Model of Solid Propellant Electrothermal-Chemical Launch with Discharge Rod Plasma Generator

Simulation of Two-Dimensional Interior Ballistics Model of Solid Propellant Electrothermalchemical Launch with Discharge Rod Plasma Generator

Numerical study on spark characteristics and evolution of plasma jet igniter

A global simulation for laser driven MeV electrons in $50μm$-diameter fast ignition targets

A repetitive pulsed electrothermal plasma jet ignition system based on capillary discharge

Numerical Simulation and Experimental Study of High-Power Thermal Equilibrium Inductively Coupled Plasma

Ignition mechanism of a dual trigger electrode hollow cathode

Modeling of the Effects of Non-Equilibrium Excitation and Electrode Geometry on H2/air Ignition in a Nanosecond Plasma Discharge

Simulation of a 50GeV PWFA Stage

An experimental and computational study on the ignition process of a pulse modulated dual-RF capacitively coupled plasma operated at various low-frequency voltage amplitudes

A study of an air-breathing electrodeless plasma thruster discharge

Experimental Study on Plasma Ignited Single-base Propellant Using SEM and EDS

Utilization of Nonthermal Plasma in Pulse Detonation Engine Ignition

Firing Range Optimization of a 155mm Uni-Modular Charge Howitzer by ETC Technology

Plasma-assisted ignition-stabilized combustion (PAISC): Benefits, limitations, and costs

Acceleration of DDT by Non-Thermal Plasma in a Single-Trial Detonation Tube

Ablation of Nonlinear-Force Driven Plasma Blocks for Fast Igniter Application

Optical Investigation of Sparks to Improve Ignition Simulation Models in Spark-Ignition Engines