Abstract:Summary form only given. Capillary discharge plasmas have been widely used as electrothermal chemical (ETC) launch devices, fusion reactor pellet injectors and high heat flux sources for material studies. In the electro thermal chemical launcher, the mechanisms of the plasma-propellant interaction are critical, with many factors being of potential importance. In particular, the role of plasma radiation is disputed. We will report the effect of three different metal ions and radiation in the capillary discharge plasma on the plasma-propellant interactions. Conventionally, a capillary initiated by a metal wire of about 2 mg and with an ablative liner material (e.g. polyethylene) is used as the plasma generator. The plasma is mainly composed of CO, H + , C, etc. The proportion of metal ions was negligible. We have designed a new capillary discharge plasma generator with different metal powders of higher weight as the initiators. The performance of the new generator is compared with the traditional one through an open-air test. A spectrometer and ICCD were used to measure the surface temperature of the propellants while a CCD was used to visualize the plasma jet. The combustion tests were conducted in a transparent closed vessel, making it possible to measure the plasma parameters at the propellant surface and observe the combustion process in the closed vessel. A fused silica window was placed between the plasma and propellants to ensure that the propellant could only be affected by plasma radiation. The burning rate and the p-t curve were obtained in the tests and the combustion products were analyzed by a mass spectrometer. Interrupted burning tests were also carried out to acquire information about the surface of the propellants at different burning stages. In order to perform accurate modeling of the plasma-propellant interaction, we have also developed a two-dimensional time-dependent capillary discharge model based on a modified ablation model. In our model, special attention is paid to the radial distribution of the capillary discharge plasma characteristics. To investigate the factors that influence the radial distribution, the radial transport of the ablation products is taken into consideration. Further, the competition between the ablation and deposition process with time in the capillary discharge is also studied. The aim of our study are to provide results that will assist the design of new propellants and new plasma generators for the ETC launcher.

Simulation of Two-Dimensional Interior Ballistics Model of Solid Propellant Electrothermalchemical Launch with Discharge Rod Plasma Generator

Simulation of Two-Dimensional Interior Ballistics Model of Solid Propellant Electrothermal-Chemical Launch with Discharge Rod Plasma Generator

Numerical Simulation on the Pressure Wave in a 30MM Electrothermal-Chemical Gun with the Discharge Rod Plasma Generator

Application of Transient Burning Rate Model of Solid Propellant in Electrothermal-Chemical Launch Simulation

Research on 2D Model of Capillary Discharge Plasma

Interior ballistic two-phase flow model and its calculation for a mixed charge structure

A model for plasma ignition of solid propellant

Simulation of an Electromagnetic Launcher with a Superconducting Inductive Pulsed Power Supply

Electrical and Optical Test of a Semi-Combustible Plasma Generator Via a Plasma Ignition Simulator

Interior Ballistic Characteristics of Electromagnetic Rail Launcher Under Continuous Firing

Calculation of Plasma Radiation in Electrothermal-Chemical Launcher

Research on the Dynamic Model of Plasma Ignition Process of Solid Propellant

Roles of Metal Ions and Plasma Radiation in the Interactions Between A Capillary Discharge Plasma and Propellants

Energy Skin Effect of Propellant Particles in Electrothermal-Chemical Launcher

Firing Range Optimization of a 155mm Uni-Modular Charge Howitzer by ETC Technology

An Experimental Investigation on the Radiation Characteristics of Plasma Jet in the Plasma-Propellant Interaction

System-level Simulation Approach and Platform for Electromagnetic Railgun System

Mechanism of Plasma Ignition in Electrothermal-Chemical Launcher

In-Bore Dynamic Measurement and Mechanism Analysis of Multi-Physics Environment for Electromagnetic Railguns

2-D Extended Fluid Model Of Applied-Field Magnetoplasmadynamic Thruster With Solid And Hollow Cathodes

Experimental and numerical study on the flight and penetration properties of explosively-formed projectile