Shear rate and roughness effect on clay-steel interface strength properties in CU and CPD drainage conditions
Shi-ao Liu,Chencong Liao,Xinbin Su,Jinjian Chen,Xiaohe Xia
DOI: https://doi.org/10.1016/j.oceaneng.2024.117956
IF: 5
2024-04-26
Ocean Engineering
Abstract:Based on the concept of the preformed failure plane, this paper conducted a series of clay-interface tests using a modified triaxial apparatus that can directly measure the interface pore pressure, to investigate the shear rate and interface roughness effect on the deviator stress, interface excess pore pressure, interface stress path, and interface friction angle in both consolidated undrained (CU) and consolidated partially drained (CPD) interface drainage conditions. In general, the specimen with the clay-steel interface had a lower shear strength than the pure clay specimen under the same testing conditions. In CU tests, the total and effective interface friction angles increase approximately linearly with the shear rate in the semi-logarithmic scale, while in CPD tests, both the total and effective interface friction angles decrease with increasing shear rate. Moreover, the increased surface roughness is found to enhance the interface shear strength and the maximum interface pore pressure at a given shear rate and confining pressure. In CU tests, both the normalized efficiency parameter E and the corresponding interface friction angle increase with the average roughness (Ra) in a logarithmic relationship, but it is difficult to describe the positive correlation perfectly in CPD tests.
engineering, civil, ocean, marine,oceanography