Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Performance Optimization of Atomic Layer Deposited HfOx Memristor by Annealing with Back-End-of-Line Compatibility

Performance Optimization of Atomic Layer Deposited HfO x Memristor by Annealing With Back-End-of-Line Compatibility

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Research on Electronic Synaptic Simulation of HfO2-based Memristor by Embedding Al2O3

Performance Regulation of a ZnO/WO x -Based Memristor and Its Application in an Emotion Circuit

Homo-layer hafnia-based memristor with large analog switching window

High-Performance Neuromorphic Computing and Logic Operation Based on a Self-Assembled Vertically Aligned Nanocomposite SrTiO 3 :MgO Film Memristor

Transparent HfO x -based memristor with robust flexibility and synapse characteristics by interfacial control of oxygen vacancies movement

Exploring the potential of TiO 2 /ZrO 2 memristors for neuromorphic computing: Annealing strategy and synaptic characteristics

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Resistive switching modulation by incorporating thermally enhanced layer in HfO2-based memristor

Sub-10 Nm Ta Channel Responsible For Superior Performance Of A Hfo2 Memristor

Mimicking biological synapses with a-HfSiOx-based memristor: implications for artificial intelligence and memory applications

In-Depth Physical Mechanism Analysis and Wearable Applications of HfO x-Based Flexible Memristors

Influence of the TiN diffusion barrier on the leakage current and ferroelectricity in an Al-doped HfOx ferroelectric memristor and its application to neuromorphic computing

An Electronic Synaptic Device Based on HfO2TiOx Bilayer Structure Memristor with Self-Compliance and Deep-Reset Characteristics.

Artificial HfO2/TiOx Synapses with Controllable Memory Window and High Uniformity for Brain-Inspired Computing

Hafnium Oxide‐Based Ferroelectric Devices for Computing‐in‐Memory Applications

An ultra high-endurance memristor using back-end-of-line amorphous SiC

Artificial HfO 2 /TiO x Synapses with Controllable Memory Window and High Uniformity for Brain-Inspired Computing.

Synaptic Plasticity and Learning Behaviors Mimicked in Single Inorganic Synapses of Pt/HfO X /zno X /tin Memristive System