Abstract:Fast heat and mass delivery with high cycling stability of the core component, hydrogen storage bed, in SDS are essential for the operation of the future tritium factory in ITER project. However, the aforementioned properties are still perplexing in large-capacity ZrCo bed, especially for that with secondary containment structure required by the actual tritium operation in the future. Herein, the performance including heating, cycling and cooling with two different size ZrCo beds (loading of ZrCo are 200 g and 2000 g respectively) were systematically studied. The experimental data shows that the maximum heating ability of the middle-size/full-scale storage bed are both about 10 degrees C/min, and the maximum hydrogen absorption capacity of these ZrCo beds are 44.6 L/405.5 L, respectively. Besides, hydrogen pressure and hydrogen retention during the following desorption can affect the cycling performance of the ZrCo bed. The use of transfer pump can reduce the pressure of the bed during the hydrogen desorption process (operated at 500 degrees C), which inhibits the disproportionation reaction of the ZrCo alloy. However, the degree of hydrogen pressure reduction in two the types of ZrCo bed are different. As a result, the cycling capacity of the middle-size bed (93.4%, lower hydrogen pressure) is higher than the full-scale bed (68.7%, higher hydrogen pressure) after 10 cycles. When the transfer pump was not used and operated at lower temperature (350 degrees C), the beds cannot release hydrogen completely, and partial hydrogen atoms are retained in the ZrCo alloy. The middle-size bed still maintains a hydrogen storage capacity of 94.5% after 10 cycles, while 75.9% of the hydrogen storage capacity remained for the full-scale bed. Therefore, the increase of hydrogen surplus in ZrCo alloy is helpful to improve its cycling stability. At last, the cooling performances of the beds under 10 different cooling methods were studied. Among the cooling methods, the best cooling rate was achieved by filling nitrogen in the secondary containment cavity and flowing water passing through the cooling circuit of the bed. This work will provide a crucial reference for the design and optimization of the subsequent operation technology of SDS in ITER. (C) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Kinetic Hydrogen Isotope Effects and Flow Compensation Strategy of the ZrCo-based Chemical Beds in Full-Scale SDS Demo-System

Deep Insight of Unique Phase Transition Behaviors and Mechanism in Zr 2 Co-H Isotope System with Ultra-Low Equilibrium Pressure

Hydrogen storage and heat transfer properties for large-capacity double thin-layered annulus ZrCo bed with secondary containment cavity

Enhancing Disproportionation Resistance of Zr2Co-based Alloys by Regulating the Binding Energy of H Atom

An Alloying Element Screening Method to Design Zr2Co Based Alloys with Superior Disproportionation Resistance

Study on the modification of Zr-Mn-V based alloys for hydrogen isotopes storage and delivery

A new strategy for remarkably improving anti-disproportionation performance and cycling stabilities of ZrCo-based hydrogen isotope storage alloys by Cu substitution and controlling cutoff desorption pressure

A review of classical hydrogen isotopes storage materials

Study on Decarbonization Process of Zr0.8Ti0.2Co Hydride Bed

Isotope engineering achieved by local coordination design in Ti-Pd co-doped ZrCo-based alloys

An Impact of Hydrogenation Phase Transformation Mechanism on the Cyclic Stabilizing Behavior of Zr0.8Ti0.2Co Alloy for Hydrogen Isotope Handling

Construction and Technological Tests of the Full-Scale Storage and Delivery Demo-System (sds) in Deuterium-Tritium Internal Fuel Circulation for Magnetic Constrained Nuclear Fusion Reactor

Parameter optimization of ZrCo–H system for durable tritium storage and delivery system of ITER

Self-sacrificial Hydrogen Channel Enhances the Poisoning Resistance of ZrCo-based Alloy

ZrCo-based hydrogen isotopes storage alloys: A review

Mechanism of Hydrogen Isotope Exchange for Tritium Removal in Plasma-Facing Materials: a Multi-Scale Investigation

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

Deep insight of unique phase transition behaviors and mechanism in Zr2Co-H isotope system with ultra-low equilibrium pressure

Positive Impacts of Tuning Lattice on Cyclic Performance in ZrCo-based Hydrogen Isotope Storage Alloys

Dual-Ion Substitution-Induced Unique Electronic Modulation to Stabilize an Orthorhombic Lattice towards Reversible Hydrogen Isotope Storage

Density Functional Theory-Based Kinetic Modeling of Reactions of Hydrogen Isotopes (H 2 , D 2 , T 2 ) and Carbonaceous Gases (CO 2 , CO, CH 4 ) on the ZrCo(110) Surface