Abstract:For an accurate numerical simulation of springback behavior and control of shape and dimensional accuracies of the manufacture component under warm and hot precision plastic forming, the use of an appropriate material model dependent with strain, strain rate and temperature describing the nonlinear unloading process is vital, which is remained to be developed. The thermo-mechanical coupling effect in difficult-to-form material deformed at elevated temperature makes the unloading process more complicated and thus more difficult to model. In this paper, by using face-centered cubic (FCC) aluminum alloys as case study materials, loadingunloading experiments with different strains and strain rates at warm and elevated temperatures of 300 - 500 degree celsius were conducted, the effects and contributions of strain, strain rate and temperature on unloading chord modulus (elastic modulus) and nonlinear unloading stress-strain response were quantified. A unique strain-, strain rate- and temperature-dependent nonlinear unloading coupled model was established. By validating and applying the nonlinear unloading coupled model in the both monotonous loading-unloading and cyclic loadingunloading warm and hot compression deformation, the calculation results agree well with experimental results, indicating that the model can describe perfectly the nonlinear unloading stress-strain responds and springback behavior. From the discussion on calculated results and capabilities of model, it was found that the proposed unified equation incorporating strain rate and temperature is also able to be coupled with the existing strain-dependent chord modulus model such as modified Yoshida-Uemori (Y-U) model. The capability of predicting nonlinear unloading curves and springback strains of aluminum alloys deformed at various strains, strain rates, and temperatures demonstrates the potential applicability of the model to a wide range of warm and hot forming process conditions.

A Modified Arrhenius‐Type Constitutive Model and Its Implementation by Means of the Safe Version of Newton–Raphson Method

FE Realization of a Thermo-Visco-Plastic Constitutive Model Using VUMAT in ABAQUS/Explicit Program

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

A Thermomechanically Coupled Finite Deformation Constitutive Model for Shape Memory Alloys Based on Hencky Strain

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

An Explicit Integration Algorithm for Introducing User-Defined Thermo-Viscoplastic Constitutive Models in Fe Simulations

Numerical Implementation of Strain Rate Dependent Thermo Viscoelastic Constitutive Relation to Simulate the Mechanical Behavior of PMMA

Implementation Of The Modified Yoshida-Uemori Model

A Modified Johnson–Cook Constitutive Model for Titanium Alloy TA31 and Its Implementation into FE

A Constitutive Model for Anisotropic Tubes Incorporating the Variation of Contractile Strain Ratio with Deformation

Numerical Integration Algorithm for the Rate-Dependent Chaboche Model

Implementation and Its Application in Finite Element Analysis of Constitutive Model for ZWT Nonlinear Viscoelastic Material

Modified Arrhenius constitutive model and simulation verification of 2A12-T4 aluminum alloy during hot compression

Constitutive Equation and Model Validation for 33cr23ni8mn3n Heat-Resistant Steel During Hot Compression

The Modified Constitutive Model Considering Strain-Temperature Coupling and Dynamic Recrystallization Effective for FEM Simulation of Milling Process

The Comparation of Arrhenius-Type and Modified Johnson–Cook Constitutive Models at Elevated Temperature for Annealed TA31 Titanium Alloy

Constitutive Model for Full-Range Elasto-Plastic Behavior of Structural Steels with Yield Plateau: Formulation and Implementation

Physical Based Constitutive Model for the Prediction of Plastic Deformation of Fe‐Cr‐Ni Stainless Steel Under High Strain Rate

Constitutive modeling based on non-associated flow rule for anisotropic sheet metals forming

A modified Arrhenius constitutive model of 2219-O aluminum alloy based on hot compression with simulation verification

A Strain Rate and Temperature Dependent Model for Describing Nonlinear Unloading Stress-Strain Response after Warm and Hot Compression Deformation