Abstract:In this work, the as-cast Al x CrFeMnNi2-x (x = 0.3, 0.7, 1.0) high-entropy alloys (HEAs) were designed via the empirical criterion and equilibrium phase diagrams, and the effect of Al/Ni ratio on the microstructure and mechanical properties was investigated and discussed. An increase of Al/Ni ratio promotes the matrix phase transition from FCC to BCC phase, this mainly is attributed to the decrease of VEC. No matter it is in FCC- or BCC-dominant HEAs, the ordered B2 phase (rich-Al and Ni) always appears together with the BCC phase, but the morphology of which translates from spherical-shape to cubical-shape, and to the weave-like microstructure due to the increase of the lattice misfit constant ε. The alloy (x = 0.3) is composed of FCC matrix phase with a small amount of BCC and spherical B2 precipitates, which exhibits favorable total ductility (∼80 %), but low yield strength (∼304 MPa); An increase of Al/Ni ratio results in the increase of the yield strength, but the decrease of the ductility. The alloy (x = 0.7) consists of the BCC matrix phase with trimodal (r-p, c-p, and s-p) distribution of B2 precipitates, which exhibits the optimal mechanical properties with the yield strength (∼1158 MPa) and a relatively high total ductility (∼50 %). Further increase of Al/Ni ratio does not influence the strength considerably, but decreases the total ductility sharply. The alloy (x = 1.0) presents a yield strength (∼1119 MPa) close to that of the alloy (x = 0.7), while the ductility is very low (∼10 %). It is mainly attributed to the spinodal weave-like microstructure, which is prone to the initiation and propagation of cracks.

Superior Strength-Ductility Synergy of Lightweight (Alnbtivcr)100- X Ni X High Entropy Alloy by Dispersed Laves Phase

Lightweight and high hardness (AlNbTiVCr)100-Ni high entropy alloys reinforced by Laves phase

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Microstructure Evolution and Strengthening Mechanisms in Ni36Co30Cr11Fe11Al12-Nb High Entropy Alloys

Microstructure and Strengthening Mechanisms in Multi-Phase Ni36co30cr11fe11al12-Xtax High Entropy Alloy

Microstructure evolution and strengthening mechanisms in Ni36Co30Cr11Fe11Al12-xNbx high entropy alloys

Microstructure evolution and mechanical properties of directionally solidified Ni36Co30Fe11Cr11Al8Nb4 high entropy alloy

Effect of Al/Ni ratio on phase, microstructure and mechanical properties of the Al CrFeMnNi2- high entropy alloys

Strength and ductility dual-enhancement of Ni36Co30Fe11Cr11Al6Ti5Nb1 high entropy alloy by directional solidification

Study on the Microstructure and Mechanical Properties of Non-Equimolar NiCoFeAlTi High Entropy Alloy Doped with Trace Elements

Effect of Al Content on Microstructure and Mechanical Properties of the (Feconiv)100-Xalx High-Entropy Alloys

Microstructural and Mechanical Properties of Non-Equimolar NiCoFeAlTi Medium Entropy Alloy Strengthening by L12 Nanoparticles

CoCrFeMnNi High-Entropy Alloys Reinforced with Laves Phase by Adding Nb and Ti Elements

Improvement of Microstructure and Mechanical Properties of CoCrCuFeNi High-Entropy Alloys by V Addition

Microstructure and Properties of Non-Equiatomic Ni10Cr6WFe9TiAlx High-Entropy Alloys Combined with High Strength and Toughness

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Microstructure and mechanical properties of lightweight Al<i><sub>x</sub></i>CrNbTiV(<i>x</i>=0.2, 0.5, 0.8) refractory high entropy alloys

Microstructural optimization of Fe x CrNiAl 0.5 Ti 0.5 high entropy alloys toward high ductility

Heterogeneous Precipitation Strengthened Non-Equiatomic NiCoFeAlTi Medium Entropy Alloy with Excellent Mechanical Properties

Effect of Nb on microstructure and properties of AlCoCrFeNi2.1 high entropy alloy