Abstract:<p>It is both an opportunity and a challenge to develop naturally fractured reservoirs (NFRs) effectively and efficiently, especially with waterflooding development measures. In order to make production performance analysis and estimated ultimate recovery (EUR) forecast for NFRs during waterflooding easier and more widely applicable, a practical integrated method was established in this study based on two-phase flow characteristics of oil and water in NFRs and classic reservoir engineering theories of non-piston like displacement of oil by water, which consists of several novel practical forecast models for EUR and well production performance. Firstly, the well-controlled original oil in place (OOIP) of an NFR can be quickly fitted and obtained from actual production data by the established relationship between cumulative oil production and cumulative water production. Then, the maximum cumulative oil production, namely, the EUR of the production well can be determined when water cut is infinitely close to 1, and the well production performance in the future can be conveniently forecasted by the derived generalized relationships between water cut and other production characteristic parameters including cumulative water (or oil) production and recovery factor of well-controlled OOIP (or EUR). A lab-scale and two field-scale NFR models with different well patterns were established and simulated so as to verify whether the practical forecast models proposed in this paper are reliable and accurate, and comparison results indicated that all these models are in good agreement with the simulated production data. Sensitivity analysis for the curve fitting model of well-controlled OOIP demonstrated that viscosity ratio of water phase to oil phase has an enormous influence on the model and residual oil saturation also has a greater influence on the model compared with connate water saturation. In addition, two actual production wells in the X oilfield were selected as case wells for field applications and it was found that the unified type-curve for recovery factor performance forecast can be determined and employed for different production wells in the same oilfield unless the viscosity ratio of water phase to oil phase, the connate water saturation and the residual oil saturation do not change comparatively. The authors believe that the practical integrated forecast method established in this study is of great help for field reservoir engineers to analyze production data and forecast EUR and well production performance in NFRs during waterflooding development processes more quickly and conveniently.</p>

A practical integrated forecast method for estimated ultimate recovery (EUR) and well production performance after water breakthrough during waterflooding in naturally fractured reservoirs (NFRs)

A Novel Method to Calculate Water Influx Parameters and Geologic Reserves for Fractured-Vuggy Reservoirs with Bottom/Edge Water

A Novel Model for Forecasting Production Performance in Waterflood Oil Reservoirs

A New Method for Optimizing Water-Flooding Strategies in Multi-Layer Sandstone Reservoirs

Novel Method for Inverted Five-Spot Reservoir Simulation at High Water-Cut Stage Based on Time-Varying Relative Permeability Curves

New Theory of Oil Production Prediction in Gas Flooding Tight Reservoirs

Research on Water Flooding Front Based on Dynamic and Static Data Inversion—A case study

Novel Integrated Approach for Waterflood Optimization in Mature Multilayer Reservoirs with Advanced Well Completions Using Capacitance Resistance Model

A fast method of waterflooding performance forecast for large-scale thick carbonate reservoirs

A new three-dimensional effective water-flooding unit model for potential tapping of remained oil in the reservoirs with rhythmic conditions

Further study on oil/water relative permeability ratio model and waterflooding performance prediction model for high water cut oilfields sustainable development

Application of Machine Learning to Predict Estimated Ultimate Recovery for Multistage Hydraulically Fractured Wells in Niobrara Shale Formation

Data-driven EUR for multistage hydraulically fractured wells in shale formation using different machine learning methods

A new method for predicting the oil displacement volume by waterflood huff-puff of the fractured-cavity type carbonate oil reservoirs

Developing an inflow performance relationship for predicting hydrocarbon recovery from horizontal wells operating in partially naturally fractured reservoirs under solution-gas drive

Prediction of multi-reservoir production for water injection well by using temperature logging data

Novel calculation method to predict gas–water two-phase production for the fractured tight-gas horizontal well

Study on EOR method in high water cut stage of low permeability A Oilfield

Productivity Simulation of Hydraulically Fractured Wells Based on Hybrid Local Grid Refinement and Embedded Discrete Fracture Model

Production forecasting for shale gas reservoirs with nanopores and complex fracture geometries using an innovative non intrusive EDFM method

Investigation on water-drive performance of a fault-karst carbonate reservoir under different well patterns and injection-production modes based on 2D visualized physical models