Abstract:Summary In a naturally fractured reservoir, natural fractures can not only provide main paths for fluid flow and increase its permeability but also complicate flow behavior and production performance. Interwell tracer tests have been widely applied to estimate the petrophysical properties; however, limited attempts have been made to accurately identify the natural fracture networks. In this study, the newly proposed numerical models have been verified and used to characterize the fracture distributions in a naturally fractured reservoir conditioned to tracer transport behavior. The stochastic fracture modeling approach is implemented to generate the randomly distributed natural fractures which are dealt with the embedded discrete fracture model (EDFM) while ensuring its sufficient accuracy. To be specific, the matrix domain is discretized using the structured grids, within which each embedded fracture is divided into a series of segments. Subsequently, nonneighboring connections (NNCs) allow us to couple the flow of fluid and tracer between the nonneighboring grid cells, while the historical tracer profiles are matched to delineate the geometry and properties of the fractures by taking multiple tracer transport mechanisms into account. Furthermore, the influences of fracture number, fracture length, fracture orientation, and tracer dispersion on the tracer production concentration have been investigated through sensitivity analysis. The response of an interwell tracer model is sensitive to the fracture parameters rather than tracer properties. A fracture network with its orientation parallel to the mainstream direction will cause the earliest tracer breakthrough. The tracer breakthrough time with an average fracture length of 40 m is 110 days earlier than that with a mean fracture length value of 10 m, while the tracer production peak concentration for the former is nearly two times higher than for the latter. A larger fracture number results in an earlier tracer breakthrough, and an intermediate fracture number will lead to the highest tracer production concentration. Additionally, the newly developed model has been validated through its comparison with the commercial ECLIPSE simulator and then extended to field applications to identify the possible fracture distributions by simulating multiwell tracer tests in the Midale field. The flexible and pragmatic EDFM-based method developed in this study can model the interwell tracer flow behavior as well as characterize the properties and geometries of the natural fractures with better accuracy and calculation efficiency in comparison with other fracture simulation methods (e.g., local grid refinement method).

Developing an inflow performance relationship for predicting hydrocarbon recovery from horizontal wells operating in partially naturally fractured reservoirs under solution-gas drive

Using Artificial Intelligence to Predict IPR for Vertical Oil Well in Solution Gas Derive Reservoirs: A New Approach

Simulation and performance prediction of partially naturally fractured reservoirs under solution gas drive primary recovery and gas injection processes

Prediction of Inflow Performance Relationship of a Gas Field Using Artificial Intelligence Techniques

Productivity performance of open hole horizontal gas well for low permeability gas reservoirs

Numerical Simulation of a Horizontal Well With Multi-Stage Oval Hydraulic Fractures in Tight Oil Reservoir Based on an Embedded Discrete Fracture Model

Effect of Cross-Well Natural Fractures and Fracture Network on Production History Match and Well Location Optimization in an Ultra-Deep Gas Reservoir

A Case Study Using 3D Hydraulic Fracturing Simulation of a Fully Integrated Subsurface 3D Reservoir Model in an Unconventional Tight Gas Reservoir

Flowback and early-time production modeling of unconventional gas wells using an improved semi-analytical method

A practical integrated forecast method for estimated ultimate recovery (EUR) and well production performance after water breakthrough during waterflooding in naturally fractured reservoirs (NFRs)

A Comprehensive Numerical Model for Simulating Fluid Transport in Nanopores

A New Way to Calculate Flow Pressure for Low Permeability Oil Well with Partially Penetrating Fracture

Field-Scale Modeling of Interwell Tracer Flow Behavior to Characterize Complex Fracture Networks Based on the Embedded Discrete Fracture Model in a Naturally Fractured Reservoir

Semianalytical Modeling for Multiphase Flow in a Fractured Low-Permeability Gas Condensate Reservoir

Novel Mathematical Model for Transient Pressure Analysis of Multifractured Horizontal Wells in Naturally Fractured Oil Reservoirs

Production performance simulation of a horizontal well in a shale gas reservoir considering the propagation of hydraulic fractures

A semi-analytical rate-transient analysis model for fractured horizontal well in tight reservoirs under multiphase flow conditions

Improved identification of fracture total factor characteristics and cross-scale flow channels by interpreting initial production data of horizontal wells

Productivity Model for Multi-Fractured Horizontal Wells with Complex Fracture Networks in Shale Oil Reservoirs Considering Fluid Desorption and Two-Phase Behavior

A new method for interpreting well-to-well interference tests and quantifying the magnitude of production impact: Theory and applications in a multi-basin case study

A Fractional Step Method to Solve Productivity Model of Horizontal Wells Based on Heterogeneous Structure of Fracture Network