Abstract:The laser induced damage in high-power laser system has received much attention in the area of laser engineering. Optical components with contaminants, which are installed in the final optical assembly (FOA), can be severely damaged under the action of extremely high laser energy. So the ultra-high cleanliness inside the high-energy laser system is required for both optical and mechanical components. Research shows that a large part of the metal particulate contaminants inside the device come from the mechanical components. The metal particulate contaminants are produced when mechanical structure surface is damaged under the irradiation of stray light. However the research about the cleanliness inside the device is mostly concentrated on the surfaces of optical components currently. The laser ablation of the mechanical components absorbing contaminants is studied little, so it is quite important to investigate the ablation mechanism of mechanical components under laser irradiation. Due to the presence of contaminants on the surfaces of mechanical components, laser ablation of monocrystalline iron absorbing contaminants is investigated by using molecular dynamics simulation. The ablation process of iron material under laser irradiation is presented. The influences of loading mode and energy density of laser as well as contamination on the surface are analyzed in the ablation process of monocrystalline iron. The results indicate that the surface atoms of monocrystalline iron show different motion states under the violent collision of contaminants atoms after laser loading. Ablated iron can be divided into ablation zone, melting zone and crystal zone according to the variation of the temperature and mass density of the atoms in each region of the ablated material. The atoms in each region show macroscopic characteristics of gaseous, liquid and solid atoms respectively. Iron is damaged more easily when laser energy is instantaneously loaded. Contaminants on the surface of iron can be removed, and iron cannot be damaged when laser energy density is below 0.0064 J/cm(2). The result of the analysis shows that the presence of contaminants makes the ablation of iron easier. Different energy loading modes affect the heat transfer mode directly. Monocrystalline iron materials are more likely to be damaged in the mode of adiabatic laser ablation in the case of short laser pulse. Thermal effect can be thought as a dominant factor for the ablation in the case of long laser pulse. The research results of this paper are helpful for providing the theoretical basis for improving the cleanliness of high-power laser system.

Research Progress on Contamination Damage and Cleaning Technology of Large-aperture Diffraction Grating

Researches on Laser Damage Resistance of Optical Films

Plasma Cleaning Technology of Organic Pollutants on Aluminized Diffraction Grating Surface

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Analysis of Grating Surface Organic Contamination in Chirped Pulse Amplification System

Nonequilibrium Plasma Cleaning of Organic Contaminants on the Surface of Diffraction Gratings

Microscopic Chemical Reaction Mechanism of Carbon Contaminants on the Surface of Pulse-compressed Gratings Cleaned by Low-pressure Plasma

Design and Analysis of a Novel Large-Aperture Grating Device and Its Experimental Validation

Diffraction Efficiency Measurement of Large Aperture Multilayer Dielectric Grating and Its Application in the Fabrication Process

A review of thermal effects and substrate damage control in laser cleaning

Stimulated Brillouin Scattering Damage of Large-Aperture Fused Silica Grating

Spectral Diagnosis of in Situ Plasma Cleaning in Large-Aperture Optical Components: Reactive Species Characterization and Prediction of Cleaning

Laser ablation mechanism of contamination on surface of single crystal iron

High-efficiency Metallic Diffraction Gratings for Laser Applications.

Laser-conditioning on multilayer dielectric gratings

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Research and Progress of Rapid Polishing Technology for Large Aperture Optics

Design of a High-Efficiency Multilayer Dielectric Diffraction Grating with Enhanced Laser Damage Threshold

Investigation of the Multimechanism Laser Cleaning Dynamics for Rough Fused Silica Surfaces with Organic Contaminants: A Computational Simulation and Atomic Analysis.

Electric Field Enhancement Effect of Aluminum Grating With Nanosecond Pulsed Laser Irradiation

Optimization Design and Laser Damage Threshold Analysis of Pulse Compression Multilayer Dielectric Gratings