Abstract:In order to clarify the magnetic-thermal-force changing rule of high-frequency transformers under different winding arrangements, this paper tests the magnetization and loss characteristics of nanocrystalline materials at different temperatures, and based on the magnetization and loss data, establishes a magnetic-thermal-force coupling calculation model of 15 kVA, 5 kHz nanocrystalline high-frequency transformers, and calculates and analyzes the magnetic flux density, loss and temperature rise distributions of high-frequency transformers with three different winding arrangements under no-load and short-circuit conditions, respectively. Through comparative analysis, it was found that under no-load conditions, the cross-transposition of winding has less influence on the magnetic flux of the high-frequency transformer core, but it can reduce the iron-core loss and transformer temperature rise. The cross-transposition of winding under short-circuit conditions can significantly reduce the leakage magnetic field strength of high-frequency transformers; complete cross-transposition weakens the high-frequency transformer losses and temperature rise better than partial cross-transposition. According to the winding current density and core leakage field distribution under short-circuit conditions, we calculated and analyzed the distribution of its the axial and radial electromagnetic forces. The results show that the axial electromagnetic force causes the winding to be squeezed from both ends to the middle, the radial electromagnetic force causes the primary winding to shrink inward and the secondary winding to expand outward, so cross-transposition can greatly reduce electromagnetic force and weakening the deformation of the winding. Therefore, high-frequency transformers of winding cross-transposed should be used in actual projects to reduce transformer temperature rise and improve efficiency and security. This research has theoretical significance for the multi-physical field coupling of high-frequency transformers and its structural design.

Neural Network-based Medium Frequency Transformer Electric Field Modeling and Sensitivity Analysis

Semi-analytical and Data-Driven Models of Electric Field Strength Considering the Actual Structure of Medium Frequency Transformers

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Broadband Equivalent Circuit Modeling for Medium Voltage High-Frequency Transformers with Multi-Shielding Structure

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Comprehensive Analysis of Electric Field Characteristics for Multi-Winding Medium Frequency Transformer

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

An Optimization Design System of Medium Frequency Transformer with Non-Ideal Geometry Structure

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Fault Warning Method for Power Transformers Based on Neural Network Algorithm Guided by Multi-Physics Simulation

General Analytical Model and Optimization for Leakage Inductances of Medium-Frequency Transformers

Calculation of Magnetic Flux Leakage and Loss of 220kv Transformer Based on MAGNET Field-Circuit Coupling

Distributed Magnetic Flux Density on the Cross-Section of a Transformer Core

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

The Full-Analytical Model of AC Loss for Hollow Copper Winding in Medium Frequency Transformer

Analysis of Frequency Response of Power Transformers Considering Frequency Variation Characteristics

Analytical Double-2D Frequency-Dependent Leakage Inductance Model for Litz-Wired High-Frequency Transformer

Research on Magnetic-Thermal-Force Multi-Physical Field Coupling of a High-Frequency Transformer with Different Winding Arrangements

Optimization of Medium-Frequency Transformers with Large Capacity and High Insulation Requirement

Thermal Network Modeling of High Frequency Insulated Core Transformers

Improving IEC Thermal Model for Oil Natural Air Natural Transformers Using Optimised Parameters Based on Dynamic Simulation