Abstract:: Despite signi ﬁ cant advances in double-crystalline coil − coil block copolymers (BCPs), investigations into double-crystalline all-conjugated rod − rod BCPs have been comparatively fewer and are limited in scope. Moreover, the ability to control the crystalline structures of all-conjugated BCPs may endow the materials and devices with enhanced optoelectronic properties over the two respective constituents. Herein, we report the synthesis of a series of poly(3-hexylthiophene)- block -poly(3-butylselenophene) (P3HT- b -P3BS) BCPs with tunable block ratios and investigate the e ﬀ ects of block ratio and thermal annealing process on their crystallization and microphase-separated structures. These rod − rod BCPs exhibit a sole P3HT crystallization (P3HT/P3BS = 63:37) or individual P3HT and P3BS crystallization (P3HT/P3BS = 55:45 and 42:58) in as-cast thin ﬁ lms, in ﬂ uenced by the block ratio of P3HT/P3BS. Interestingly, upon 200 ° C-annealing (i.e., annealed at the temperature below the melting points of P3HT and P3BS form I blocks), P3HT- b -P3BS (P3HT/P3BS = 63:37) remains the sole P3HT crystallization, while P3HT- b -P3BS (P3HT/ P3BS = 55:45 and 42:58) transforms from two individual P3HT and P3BS crystal domains into cocrystals, accompanied by the phase transition of P3BS block from form II to I. Remarkably, after a higher thermal annealing at 230 ° C (i.e., close to the melting point of P3HT block yet below the melting point of P3BS form I block), the cocrystalline structures originally existing in P3HT- b P3BS (P3HT/P3BS = 55:45 and 42:58) at the 200 ° C-annealing process do not form, and they reverse back to individual P3HT and P3BS form I crystals. Finally, the relationship between various structures of P3HT- b -P3BS and the resulting charge mobilities is clari ﬁ ed. This study provides an insight into the interplay between microphase separation of P3HT- b -P3BS and crystallization of both P3HT and P3BS blocks tailored by the block ratio and thermal annealing temperature and correlates their di ﬀ erent structures with the charge transport properties. high-resolution pattern. Di ﬀ erential scanning calorimetry (DSC) was measured using a TA DSC Q2000 at a heating rate of 10 ° C/min under N 2 ﬂ ow. UV − vis absorption spectra were recorded on PerkinElmer Lambda 750 UV − vis spectropho-tometers. Cyclic Voltammetry (CV) curves were obtained using a CHI 660 Electrochemical Analyzer with a degassed acetonitrile solution of tetrabutylammonium hexa ﬂ uorophosphate (Bu 4 NPF 6 , 0.1 M). Atomic force microscopy (AFM) images were obtained using a Bruker Dimension FastScan in the tapping mode. The samples for AFM measurement were prepared by spin-coating the polymer solutions (10 mg/mL) on silicon wafers at 2000 r/min for 20 s. The charge transport properties of OFETs were measured using a Keithley 4200-SCS in an argon- ﬁ lled glovebox.

Unfolding the Cocrystallization–charge Transport Correlation in All-Conjugated Triblock Copolymers Via Meticulous Molecular Engineering for Organic Field-Effect Transistors

Unravelling the Correlation Between Charge Mobility and Cocrystallization in Rod–Rod Block Copolymers for High‐Performance Field‐Effect Transistors

Tuning Cocrystallization, Microphase Separation, and Optical Property of All-Conjugated Triblock Copolymers by Molecular Engineering

Effect of Block Sequence in All-Conjugated Triblock Copoly(3-alkylthiophene)s on Control of the Crystallization and Field-Effect Mobility

Synergistic Manipulation of Phase Transition Between Cocrystallization and Microphase Segregation in Conjugated Triblock Copolymers for Organic Field-Effect Transistors

Interrogating the Effect of Block Sequence on Cocrystallization, Microphase Separation, and Charge Transport in All-Conjugated Triblock Copolymers

Tailoring Co-crystallization over Microphase Separation in Conjugated Block Copolymers Via Rational Film Processing for Field-Effect Transistors

Cocrystallization-Promoted Charge Mobility in All-Conjugated Diblock Copolymers for High-Performance Field-Effect Transistors

Correlating Crystalline Structure with Charge Mobility in Conjugated Statistical Copolymers for Field-Effect Transistors

Interrogating Cocrystallization and Microphase Segregation in Meticulously Engineered Rod–Rod Poly(thieno)thiophene-Based Block Copolymers for Organic Field-Effect Transistors

Unravelling the Correlation Between Microphase Separation and Cocrystallization in Thiophene-Selenophene Block Copolymers for Organic Field-Effect Transistors

Tailoring Cocrystallization and Microphase Separation in Rod–Rod Block Copolymers for Field-Effect Transistors

Meticulous Molecular Engineering of Crystal Orientation and Morphology in Conjugated Polymer Thin Films for Field-Effect Transistors

Tailoring Polymorph, Crystal Orientation, and Large-Scale Alignment in Conjugated Polymers Via Rubbing for Field-Effect Transistors

Meniscus-Assisted Solution Printing Enables Cocrystallization in Poly(3-alkylthiophene)-based Blends for Field-Effect Transistors

Conjugated Polymer Controlled Morphology and Charge Transport of Small-Molecule Organic Semiconductors

Unraveling the Co-Crystallization-Charge Transport Relation in Conjugated Polymer Blends Via Meniscus-Assisted Solution-Shearing

Unraveling the Phase Behavior of All-Conjugated Donor–Acceptor Block Copolymers Through Molecular Engineering

Toward Efficient Charge Transport of Polymer-Based Organic Field-Effect Transistors: Molecular Design, Processing, and Functional Utilization

Theoretical Investigation on the Charge Transport Properties of 2,5-Di(cyanovinyl)-thiophene/furan with the Kinetic Monte Carlo Method

Crystal Polymorph Control for High-Performance Organic Field-Effect Transistors