Abstract:Despite the fact that three-dimensional organic-inorganic hybrid perovskite is regarded as a promising material in the field of optoelectronics and microelectronics due to its excellent photoelectric properties, however, the instability under the moisture environment and the gate-voltage screening effect associated with ionic transport are still serious, which restricts the development of perovskite devices. Here in this work, the lead iodide perovskite (PEA)2(MA)n–1PbnI3n+1 series are successfully prepared by one-step solution method, including pure-two-dimensional (pure-2D), quasi-two-dimensional (quasi-2D) and traditional three-dimensional (3D) perovskite materials. The dimension and microstructure of the perovskites are regulated, and the effects of dimensions on the performance of organic-inorganic hybrid perovskite materials are investigated firstly. The crystallization of the 2D perovskites and 3D perovskite films are observed obviously. Moreover, the surface of pure-2D perovskite film with discoid, regular and micron-sized grains is smoother than that of 3D perovskite film. And also, the unapparent grain boundary is exhibited in the quasi-2D perovskites. A uniform perovskite film with full coverage and inconspicuous grain boundaries facilitates the transmission capacity of the charge carriers in the channel layer due to the reduction of defects caused by the grain boundaries. And benefited from the high-quality films with inconspicuous grain boundary as demonstrated, the quasi-2D hybrid perovskite film exhibits a longer carrier lifetime (τns) than traditional 3D MAPbI3 perovskite film, revealing that the layered 2D structure is more favorable for carrier transport due to the fewer defects in it. In addition, under the condition of the same environment humidity, the 2D perovskite materials show better moisture stability. Then, to investigate the influences of dimensional structure on the perovskite field-effect devices, we fabricate the bottom-gate and top-contact thin film transistors (TFTs) based on the perovskite materials with different dimensions. As a result, the instability and ion migration effect for each of the devices are suppressed effectively due to the distinct 2D layer-structure and quantum confinement effect, which leads the device performance to be further improved. The device based on quasi-2D (n = 6) channel TFT achieves a hole mobility (μhole) of 3.9 cm2/(V·s), an on-off current ratio of 104 and more, and a 1.85V turn-on voltage of 1.85 V. The first application of quasi-2D organic and inorganic hybrid perovskite materials to thin film transistors provides a new idea for preparing the high-performance and stable thin film transistor devices.

Investigation of 3D and 2D/3D Heterojunction Perovskite-Based Phototransistors

Two‐dimensionalization of 3D Perovskites for Passive Narrowband Photodetection

Hybrid Field-Effect Transistors and Photodetectors Based on Organic Semiconductor and CsPbI3 Perovskite Nanorods Bilayer Structure

Stable and broadband photodetectors based on 3D/2D perovskite heterostructures with surface passivation

Stable Graphene-Two-Dimensional Multiphase Perovskite Heterostructure Phototransistors with High Gain.

Photodetectors Based on Two-Dimensional Layer-Structured Hybrid Lead Iodide Perovskite Semiconductors

Air-processed 2D/3D perovskite solar cell achieve high-efficient and stable performance via graded interface engineering

2D/3D Perovskite Photodetectors with High Response Frequency and Improved Stability Based on Thiophene-2-ethylamine and Dual Additives

Thin Film Transistor Based on Two-Dimensional Organic-Inorganic Hybrid Perovskite

Research Progress on the Stability of Organic–Inorganic Halide Perovskite Photodetectors in a Humid Environment Through the Modification of Perovskite Layers

A High‐Performance and Long‐Term Air‐Stable CH <sub>3</sub> NH <sub>3</sub> PbI <sub>3</sub> /C8BTBT Heterojunction Photodetector Fabricated via Chemical Vapor Deposition

Novel 3D Printing Encapsulation Strategies for Perovskite Photodetectors

A 2D/3D heterojunction engineering for carbon-based hole-transport-layer-free perovskite solar cells

High-performance and stable 2D/3D perovskite photodetectors enabled by PEAI passivation

Synergistic Doping Strategy with Novel Multi‐Carbonyl Conductive Polymer Enables Stable Self‐Powered Perovskite Photodetectors

Bulk Single Crystals of a Narrow Band Gap Three-Dimensional Hybrid Perovskitoid Enabling Ultrastable Photodetection

Three-dimensional Pyramidal CsPbBr3/C8BTBT Film Heterojunction Photodetectors with High Responsivity and Long-Term Stability

High-Performance Broadband Perovskite Photodetectors Based on Ch3nh3pbi3/C8btbt Heterojunction

A High‐Performance and Long‐Term Air‐Stable CH3NH3PbI3/C8BTBT Heterojunction Photodetector Fabricated Via Chemical Vapor Deposition

Hybrid Interfacial Engineering: An Enabling Strategy for Highly Sensitive and Stable Perovskite Quantum Dots/Organic Heterojunction Phototransistors

2D/3D Perovskite Hybrids As Moisture-Tolerant and Efficient Light Absorbers for Solar Cells.