Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

High Spatial Resolution Fast Brillouin Optical Time-Domain Analysis Enabled by Frequency-Agility Digital Optical Frequency Comb

Spatial resolution improvement of single-shot digital optical frequency comb-based Brillouin optical time domain analysis utilizing multiple pump pulses.

Frequency-Agility Probes Enable High Spatial Resolution for Digital Optical Frequency Comb-Based Fast BOTDA

Ultrafast Resolution-Enhanced Digital Optical Frequency Comb-Based BOTDA with Pump Pulse Array Coding

High-accuracy Sweep-Free BOTDA Enabled by Simultaneous Full-Field Brillouin Spectra Measurement

Single Measurement Brillouin Optical Time Domain Analyzer Based on Digital Optical Frequency Comb

BOTDA sensor utilizing digital optical frequency comb based phase spectrum measurement

High-spatial-resolution Fast Brillouin Optical Fiber Sensor for Distributed Dynamic Measurement Based on Differential Double-Pulse

Brillouin Optical Time Domain Collider for Fast Dynamic Sensing

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Recent Progress in Fast Distributed Brillouin Optical Fiber Sensing

Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs

150 Km Fast BOTDA Based on the Optical Chirp Chain Probe Wave and Brillouin Loss Scheme.

Accuracy Enhancement in Sweep-Free BOTDA Enabled by Simultaneous Full-Field Brillouin Spectrums Measurement

High-Spatial-Resolution Fast BOTDA for Dynamic Strain Measurement Based on Differential Double-Pulse and Second-Order Sideband of Modulation

Brillouin Optical Time Domain Analysis with Phase-Modulated Probe and Time-of-Flight Servo Loop

Scanning-free Hybrid Rayleigh-Brillouin Distributed Fiber-Optic Sensing System

Distributed Pound-Drever-Hall Technique for Fast Brillouin Optical Time Domain Analysis

Single-measurement BOTDA Using DOFC Based Brillouin Phase Spectrum Detection

Spatial Resolution Improved OFDM-BOTDA Utilizing Frequency-Division-multiplexed Brillouin Phase/gain Spectrum

Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement