Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Distributed Pound-Drever-Hall Technique for Fast Brillouin Optical Time Domain Analysis

Brillouin Optical Time Domain Analysis with Phase-Modulated Probe and Time-of-Flight Servo Loop

150 Km Fast BOTDA Based on the Optical Chirp Chain Probe Wave and Brillouin Loss Scheme.

Single Measurement Brillouin Optical Time Domain Analyzer Based on Digital Optical Frequency Comb

Recent Progress in Fast Distributed Brillouin Optical Fiber Sensing

High-spatial-resolution Fast Brillouin Optical Fiber Sensor for Distributed Dynamic Measurement Based on Differential Double-Pulse

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement

Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs

High Spatial Resolution Fast Brillouin Optical Time-Domain Analysis Enabled by Frequency-Agility Digital Optical Frequency Comb

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

Brillouin Optical Time Domain Collider for Fast Dynamic Sensing

Efficient Demodulation of Brillouin Phase Spectra and Performance Enhancement in BOTDA Incorporating Phase Noise Elimination

High-accuracy Sweep-Free BOTDA Enabled by Simultaneous Full-Field Brillouin Spectra Measurement

Fast Acquirable Brillouin Optical Time-Domain Reflectometry Based on Bipolar-Chirped Pulse Pair

High-performance optical chirp chain BOTDA by using a pattern recognition algorithm and the differential pulse-width pair technique

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Scanning-free Hybrid Rayleigh-Brillouin Distributed Fiber-Optic Sensing System

Fast Distributed Brillouin Optical Fiber Sensing Based on Pump Frequency Modulation

Dynamic Distributed Optical Fiber Sensing Based on Simultaneous Measurement of Brillouin Gain and Loss Spectra with Frequency-Agile Technique.