Abstract:The dependences of the physical and mechanical properties (hardness H, elastic modulus E, resistance H/E to elastic deformation, and resistance H3/E2 to plastic deformation) of the samples of matrices from hard alloy 94 wt % WC‒6 wt % Co with different contents (from 0 to 10 wt %) of chromium diboride in composite diamond-containing materials obtained by cold pressing with subsequent vacuum hot pressing, according to the results of nanoindentation. It is shown that the addition of CrB2 micropowder to the composition of the 94WC‒6Co composite makes it possible to obtain a more finely grained structure, the parameters of which can be purposefully controlled by changing its concentration. The composites containing CrB2 additive are characterized by a more uniform phase distribution, a higher mutual solubility of the components, and the absence of pores at the interfaces. It is found that the P–h loading curves for composites of the WC–Co–CrB2 system are able to preserve their integrity in comparison with WC–Co composites. It was found that the introduction of the additive CrB2 (in the range from 0 to 10 wt %) in the composition of the composite 94WC‒6Co causes decreases in hardness H from 34.2 to 28.4 GPa and in elastic modulus E from 800.4 to 510.2 GPa, but gives rise to more substantial increases in resistance H/E to elastic deformation from 0.043 to 0.056 and in resistance H3/E2 to plastic deformation from 0.062 to 0.088 MPa. The development of composite diamond-containing materials based on the matrix of hard alloy WC‒Co‒CrB2 with enhanced H/E and H3/E2 parameters is important for optimizing the design of drilling tools and increasing their reliability and wear resistance.

Mechanical properties and microstructural characteristics of WC-bronze-based impregnated diamond composite reinforced by nano-NbC

Properties of WC-bronze based matrix material for diamond bit reinforced by multielement nanoparticles

Long-term Ball Milling and Hot Pressing of In-Situ Nanoscale Tungsten Carbides Reinforced Copper Composite and Its Characterization

Effect of WC Nanoparticles on the Microstructure and Properties of WC-Bronze-Ni-Mn Based Diamond Composites

The Effect Of Zro2 Nanoparticles On The Microstructure And Properties Of Sintered Wc-Bronze-Based Diamond Composites

Dispersion strengthened impregnated drill bits by WC nanoparticles

Physical and Mechanical Properties of WC‒Co‒CrB2 Matrices of Composite Diamond-Containing Materials Sintered by Vacuum Hot Pressing for Drilling Tool Applications

Bending Strength and Cutting Performance of WB-Coated-Diamond/Fe-Ni Composites

Microstructure and Processing Performance of Brazed Diamond Drill Bits with Ni–Cr + Cu–Ce Composite Solder

Study on Effects of Cnts on the Properties of Wc-Based Impregnated Diamond Matrix Composites

Wear performance of the Fe-Ni-WC-based impregnated diamond bit with Mo2C-coated diamonds: Effect of the interface layer

Mechanical Properties and Interface Microstructure of Fe-Ni-Wc-Based Impregnated Diamond Composite Reinforced by Mo2c Layer

Increasing the durability of an impregnated diamond core bit for drilling hard rocks

Influence of B4C Coating on Graphitization for Diamond/wc-Fe-ni Composite

Effects of Sintering Parameters and WC Addition on Properties of Iron-Nickel Pre-Alloy Matrix Diamond Composites

Effect of WC Incorporation on the Microstructure and Mechanical Properties of Ni625/WC Spark Plasma Sintered Composites

Impact of Ce 2 O 3 on microstructure and properties of matrix-body for PDC drill bits synthesized via pressureless melt infiltration

Preparation and Impact‐abrasive Wear Behavior of NbC Reinforced Iron Matrix Composites

Processing of Diamond Enhanced Cemented Tungsten Carbide Insert for Rock Drilling

Microstructure of WC–Co–VN hard-alloy matrix for diamond-bearing details of drilling tools

In Situ NbC Particulate-Reinforced Iron Matrix Composite: Microstructure and Abrasive Wear Characteristics