Abstract:This paper studies the dynamics of an atomic force microscopy (AFM) cantilever that is considered to be operating under continuous viscoelastic surface contact with material profiles based on the modified nonlocal theory of elasticity. The contact between the cantilever's tip and the sample surface is modeled using a linear stiffness–damper pair and a lumped mass at the beam's free end. The higher-order partial differential equation (PDE) governing the AFM nanocantilever transverse motion and its associated higher-order boundary conditions (BCs) are derived employing extended Hamilton's principle based on the nonlinear nonlocal higher-order constitutive relation in Euler–Bernoulli beam model. The Galerkin's decomposition method is applied to discretize the higher-order PDE and BCs of motion into a set of ordinary differential equations (ODEs) via the mode summation technique using eigenfunctions (mode shapes) of a classic cantilever thin beam. Then, using state-space form of ODEs of motion the frequency analysis is performed based on the eigenvalues of vibration motion. The obtained results are validated with the literature works. The impact of various parameters including nonlocal nanoscale elasticity parameter, added point mass, contact stiffness and viscous damping factors and the specific position where the concentrated mass and the contact stiffness–damper pair are attached to the beam on the resonant frequencies of AFM cantilever is comprehensively investigated. Numerical simulations showed that the resonance frequencies of the AFM cantilever increase by increasing the value of nonlocal nanoscale parameter. Also, it was concluded that an increase in the nonlocal parameter and surface contact stiffness leads the AFM cantilever to be more stiffened. Moreover, it was seen that by increasing the position distance of lumped mass on the beam and contact spring–damper pair from the beam's fixed end, the resonant frequency reduction in the larger values of the surface contact stiffness is more noticeable.

Chaotic Criterion for Micro-Cantilevers of Atomic Force Microscopes

Investigation on the Impact of Excitation Amplitude on AFM-TM Microcantilever Beam System's Dynamic Characteristics and Implementation of an Equivalent Circuit

Fractal Analysis of Local Activity and Chaotic Motion in Nonlinear Nonplanar Vibrations for Cantilever Beams

Calibration of the Effective Spring Constant of Ultra-Short Cantilevers for A High-Speed Atomic Force Microscope

Thermal fuctuations and dynamic modelling of a dAFM cantilever

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

A macro-mesoscopic method for forced vibration behavior of SiCf/Ti composite cantilever beam

Research Progress on the Calibration Methods for Elastic Constant of Atomic Force Microscopy Cantilevers

A general dynamic theoretical model of elastic micro-structures with consideration of couple stress effects and its application in mechanical analysis of size-dependent properties

Experiments on the Deformation of MEMS Mciro-Cantilever Using AFM

Nonlinear dynamic analysis of atomic force microscopy under bounded noise parametric excitation

Torsional Vibrations of A Cantilever with Lateral Friction in A Resonance Friction Microscope

DYNAMIC EXPERIMENTAL INVESTIGATION OF AN UNILATERAL IMPACTING CANTILEVER BEAM

Flexural resonant frequencies of an AFM cantilever in viscoelastic surface contact mode using modified nonlocal elasticity theory

Coulomb-actuated microbeams revisited: experimental and numerical modal decomposition of the saddle-node bifurcation

Analysis and Experiment on the Cantilever Beam with Magnetic Interactions

Coulomb actuated microbeams: A Chebyshev-Edgeworth approach to highly efficient lumped parameter models

Experimental Characterization of the static behaviour of microcatntilevers electrostatically actuated

Nonlinear response of an imperfect microcantilever static and dynamically actuated considering uncertainties and noise

Enhancing higher-order modal response in multifrequency atomic force microscopy with a coupled cantilever system

Fabrication and Fatigue Testing of an Electrostatically Driven Microcantilever Beam