Abstract:In precast reinforced concrete frame structures, beam-column joints suffer severe damage under large deformations, which may significantly influence their performance in resisting progressive collapse. A static progressive collapse test was conducted on one conventional reinforced concrete beam-column substructure (RC) and four precast reinforced concrete beam-column substructures with wet connections (PCWC). A quasi-uniformly distributed load was applied to the substructures to simulate gravity loads. The first group of PCWC specimens consisted of two specimens with different layouts of mechanical sleeves, in which the beam and column reinforcements were connected through mechanical sleeves and grout-filled coupling sleeves, respectively. In the second group of PCWC specimens, the beam and column reinforcements were joined through a 90° bend anchorage and lapping in grout-filled holes, respectively. In one of the PCWC specimens in this group, unbonded prestressed strands (UPS) were also adopted. For the first group, premature failure of the mechanical sleeve connections occurred, which reduced the collapse resistances of the PCWC specimens compared with that of the RC specimen. For the second group, the damage mode and collapse resistance of the specimen without UPS were similar to those of the RC specimen. Furthermore, the collapse resistance of the specimen with UPS, which generated additional axial force along the beam, was greater than that of the RC specimen. The connections of the column reinforcements in all PCWC specimens exhibited robustness under large deformations of progressive collapse, even though large horizontal deformations and slips along the grout-layer were observed in the specimen with UPS. An analytical model was then developed to study the collapse resistances of the specimens, particularly the contributions of the compressive arch action and the catenary action. Finally, numerical simulations were used to optimize the configurations of PCWC connections, namely the arrangements of the mechanical sleeves, levels of the UPS, and strength of the cast-in-situ concrete, to improve their performance in resisting progressive collapse.

Pre-relaxed cables for improving progressive collapse resistance of RC frame subassemblages considering slabs

Cfrp Strip Cable Retrofit of Rc Frame for Collapse Resistance

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Experimental Investigation of RC Beam-Slab Substructures Against Progressive Collapse Subject to an Edge-Column-removal Scenario

Kinked Rebar Configurations for Improving the Progressive Collapse Behaviours of RC Frames under Middle Column Removal Scenarios

Experimental and modeling study on the progressive collapse resistance of a reinforced concrete frame structure under a middle column removal scenario

FRP retrofit for RC frame substructures against progressive collapse: Scheme optimisation and resistance calculation

Experimental Study on the Progressive Collapse Resistance of RC Slabs

Cyclic Loading Behaviors of Novel RC Beams with Kinked Rebar Configuration

Analytical model on progressive collapse resistance of prestressed precast concrete frame under middle column removal scenario

Experimental and numerical investigation of the progressive collapse of precast reinforced concrete frame substructures with wet connections

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Numerical Modelling of the Progressive Collapse of Reinforced Concrete Frames with Different Lateral Restraints

Application of Fiber Model for Progressive Collapse Analysis of Reinforced Concrete Frames *

Experimental and theoretical analyses of the progressive collapse resistance of NSM strengthening RC frames after the failure of a corner column

Experimental studies on a novel structural detailing of RC frames to resist earthquake and progressive collapse

Experimental and numerical investigation on seismic performance of novel cable-restraining composite rubber bearings for highway bridges

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

A Novel Kinked Rebar Configuration for Simultaneously Improving the Seismic Performance and Progressive Collapse Resistance of RC Frame Structures

Experimental Study of Novel Concrete Frames Considering Earthquake and Progressive Collapse