Abstract:Improving the integrity of precast concrete (PC) frame structures using dry connections is essential for enhancing their robustness against progressive collapse. Therefore, three PC beam–column assemblies using different dry connections specially designed to ensure the connectivity were experimentally examined under progressive collapse scenarios. And a seven-point loading tree device was adopted to simulate the uniformly distributed loading conditions in practical engineering. The connection details were classified as follows: normal top-and-seat angle connection in TSA, strengthened top-and-seat angle connection in STSA, and strengthened top-and-seat angle with high ductility longitudinal reinforcements in the plastic regions in DSTSA. Under small deformations, STSA had the highest first peak load attributable to its strengthened joint connection. TSA obtained a lower load than that of STSA because of the low joint connection stiffness. Meanwhile, DSTSA achieved the lowest load among the three specimens because the smoother surface of the high-ductility reinforcements (compared with that of normal ones) weakened its bond to the concrete. However, under large deformations, the high ductility of the reinforcements ensured the specimen integrity; consequently, the largest final load was achieved in DSTSA. On the contrary, the high joint stiffness and normal reinforcements in STSA hindered the beam end rotation, and the steel angle failed early in TSA. As a result, the two connections failed to ensure the specimen integrity. To further shed light on the resistance mechanisms of beam–column assemblies under the uniformly distributed loading condition, an iteration-based model was developed to calculate the first peak load under the beam and compressive arch actions. The maximum prediction error achieved was 12%. Based on the model, the load contribution from the friction effect of the loading device was identified as 27%. And it was found that during the collapse, increasing reinforcement deformation region that might be induced by slippage between the concrete and reinforcements could lead to a continuous increase in the horizontal reaction force after the specimen reaching the first peak load.

Analytical model on progressive collapse resistance of prestressed precast concrete frame under middle column removal scenario

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Collapse tests of RC frame with sudden middle column removal

Cfrp Strip Cable Retrofit of Rc Frame for Collapse Resistance

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Numerical Modelling of the Progressive Collapse of Reinforced Concrete Frames with Different Lateral Restraints

Multilinear model for progressive collapse response of reinforced concrete frames under penultimate column removal scenario

Efficient numerical model for progressive collapse analysis of prestressed concrete frame structures

Progressive collapse resistance of self-centering infilled precast concrete frame under side column removal scenario

Analysis of Progressive Collapse Resistance in Precast Concrete Frame with a Novel Connection Method

Progressive collapse resistance of exterior reinforced concrete frames and simplified method for catenary action

Experimental and Computational Assessments of Progressive Collapse Resistance of Reinforced Concrete Planar Frames Subjected to Penultimate Column Removal Scenario

Numerical Investigation of Progressive Collapse Resistance of Reinforced Concrete Frames Subject to Column Removals from Different Stories

Progressive collapse resistance of steel frame with beam to column transfer structure under a middle column-removal scenario

Progressive collapse analysis of precast reinforced concrete beam-column assemblies with different dry connections

Progressive collapse resistance of composite frame with concrete-filled steel tubular column under a penultimate column removal scenario

Numerical analysis on collapse performance of post-tensioned concrete frames with post-tensioning BFRP bars under an interior-column-removal scenario

Progressive collapse resistance of precast concrete beam–column assemblies using dry connections under uniformly distributed loading condition

Progressive Collapse Analysis of Concrete-filled Steel Tubular Column to Steel Beam Connections Using Multi-scale Model

Experimental and modeling study on the progressive collapse resistance of a reinforced concrete frame structure under a middle column removal scenario