Abstract:Bi2Te3-based bulk materials are the best commercially available thermoelectric materials for near room temperature applications. However, the poor mechanical properties of zone melting material and inferior thermoelectric performance of powder metallurgical material restrict their large scale deployment. In this study, p-type Bi2Te3-based materials were prepared using the hot extrusion technique, and the underlying mechanisms for microstructure evolution were revealed. The hot extrusion speed significantly impacts the strain rate, an indicator to modulate the dynamic recrystallization (DRX) and grain growth, thereby effectively regulating the microstructures of samples. For the sample extruded at a speed of 1.0 mm min- 1, the refined grain with an average grain size of 1.53 mu m and an orientation factor F(110) of 0.28 is achieved. This highly textured structure and high-density low-angle boundaries (LAGBs) maintain the high carrier mobility of 264 cm2 V- 1 s-1, comparable with the zone melting sample. In contrast, increasing grain boundaries, dislocations, and inherent point defects intensifies the phonon scattering and suppresses the lattice thermal conductivity to 0.73 W m- 1 K- 1. All these contribute to a practical high ZT value of 1.1 at room temperature. Moreover, the fine grains and highdensity dislocations ensure robust mechanic properties with a compressive strength of 189 MPa and a bending strength of 139 MPa, which is a guarantee for the successful cutting of microparticles with dimensions of 100 x 100 x 200 mu m3. The fabrication of high-quality materials with both high thermoelectric performance and strong mechanical properties paves the way for the miniaturization of thermoelectric modules.

Dramatic Enhancement of Thermoelectric Performance in PbTe by Unconventional Grain Shrinking in the Sintering Process

Dramatic Enhancement of Thermoelectric Performance in PbTe by Unconventional Grain Shrinking in Sintering Process

Enhanced thermoelectric performance of n -type PbTe bulk materials fabricated by semisolid powder processing

Thermoelectric Enhancements in PbTe Alloys Due to Dislocation‐Induced Strains and Converged Bands

Manipulation of Band Degeneracy and Lattice Strain for Extraordinary PbTe Thermoelectrics

High Thermoelectric Performance in PbTe Due to Large Nanoscale Ag2Te Precipitates and La Doping

Thermoelectric enhancement at low temperature in nonstoichiometric lead-telluride compounds

Regulation of Dynamic Recrystallization in P-Type Bi2Te3-Based Compounds Leads to High Thermoelectric Performance and Robust Mechanical Properties

Ordered Grain Boundary Reconstruction Induces High-Efficiency Thermoelectric Power Generation in SnTe

High Performance Thermoelectrics from Earth-Abundant Materials: Enhanced Figure of Merit in Pbs Through Nanostructuring Grain Size

Strained Endotaxial PbS Nanoprecipitates Boosting Ultrahigh Thermoelectric Quality Factor in n-Type PbTe As-Cast Ingots

Achieving Superior Performance in Thermoelectric Bi0.4Sb1.6Te3.72 by Enhancing Texture and Inducing High-Density Line Defects

Realizing high thermoelectric performance in non-nanostructured n-type PbTe

High Thermoelectric Performance of BixSb2−xTe3 Alloy Achieved Via Structural Manipulation under Optimized Heat Treatment

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Extraordinary Thermoelectric Performance Realized in N‐type PbTe Through Multiphase Nanostructure Engineering

Enhancing Thermoelectric Performance of SnTe Via Nanostructuring Particle Size

Creating Zipper‐Like Van Der Waals Gap Discontinuity in Low‐Temperature‐Processed Nanostructured PbBi 2 N Te 1+3 N : Enhanced Phonon Scattering and Improved Thermoelectric Performance

Non-equilibrium Processing Leads to Record High Thermoelectric Figure of Merit in PbTe–SrTe

Tuning Multiscale Microstructures to Enhance Thermoelectric Performance of N‐type Bismuth‐Telluride‐Based Solid Solutions

Synergy of Valence Band Modulation and Grain Boundary Engineering Leading to Improved Thermoelectric Performance in SnTe