Abstract:The authors regret that Fig. 5 of this paper was incorrect. As a esult, discussion on Fig. 5 needs to be revised. The corrected Fig. 5 nd discussion are given below. The authors would like to apologize or an inconvenience that may have caused to the readers of the ournal. The last sentence of the 5th paragraph in Section 3.1 should e revised as “It can be observed in Fig. 4(b) and (d) that the attice interplanar spacings of 2.48 A, 3.03 A and 3.73 A corresponds to the (002), (020)/(211) and (011) planes of orthorhombic LiMn0.9Fe0.1PO4, respectively, revealing a preferable crystal growth along bc plane.” The sentence “In morphological viewpoint, plate-like particles (S22) with prominent ac plane and small size in [010] direction is expected to provide a higher capacity than spindle-like particles (S21).” is to be deleted in the 1st paragraph in Section 3.2. The word “ac plane” in Section 4 should be revised as “bc plane”.

Erratum: Growth of Conformal Graphene Cages on Micrometre-Sized Silicon Particles As Stable Battery Anodes

Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Correction: Growth Mechanism of Ceria Nanorods by Precipitation at Room Temperature and Morphology-Dependent Photocatalytic Performance

Erratum: Substrate-induced Bandgap Opening in Epitaxial Graphene.

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Correction: The examination of graphene oxide for rechargeable lithium storage as a novel cathode material

Erratum: Good Structural Stability of Si Anodes Achieved through Dispersant Addition and Use of Carbon Fabric as Conductive Framework [ J. Electrochem. Soc., 168, 060517 (2021)]

Publisher Correction: Aligning Academia and Industry for Unified Battery Performance Metrics

Erratum: Improving a Mg/S Battery with YCl 3 Additive and Magnesium Polysulfide.

Erratum: Facile synthesis of high-quality graphene nanoribbons

Corrigendum: Nitrogen-Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium- and Sodium-Ion Batteries.

Erratum to “critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery[Int. J. Electrochem. Sci., 11 (2016) 2461-2472]”

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Corrigendum: Revealing the Role of Lithium Carbonate at Lithium Metal Anodes Through Study of Gas-Reacted Interphases ]

Erratum: Evaluation of Heat Generation and Thermal Degradation of Lithium Ion Batteries by a Calorimetry Method [ J. Electrochem. Soc., 168, 060553 (2021)]

Erratum: Thermal analysis of injectable, cellular scale optoelectronics with pulsed power (Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences …

Correction to “Kinetics on Li Deintercalation in Mg- or Li-Doped SiO/Graphite Composite Anodes for Li Ion Batteries: Dopant Effect”

Erratum: Revealing the Mechanism Behind Sudden Capacity Loss in Lithium Metal Batteries ]

Correction: DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries

Erratum to: Conformal and continuous deposition of bifunctional cobalt phosphide layers on p-silicon nanowire arrays for improved solar hydrogen evolution

Corrigendum to “morphology Regulation of Nano LiMn0.9Fe0.1PO4 by Solvothermal Synthesis for Lithium Ion Batteries” [electrochimica Acta 112 (2013) 144-148]