Abstract:Post-heat treatment is commonly employed to improve the microstructural homogeneity and enhance the mechanical performances of the additively manufactured metallic materials. In this work, a ternary (NiTi) _91 Nb _9 (at.%) shape memory alloy was produced by laser powder bed fusion (L-PBF) using pre-alloyed NiTi and elemental Nb powders. The effect of solution treatment on the microstructure, phase transformation behavior and mechanical/functional performances was investigated. The in-situ alloyed (NiTi) _91 Nb _9 alloy exhibits a submicron cellular-dendritic structure surrounding the supersaturated B2-NiTi matrix. Upon high-temperature (1273 K) solution treatment, Nb-rich precipitates were precipitated from the supersaturated matrix. The fragmentation and spheroidization of the NiTi/Nb eutectics occurred during solution treatment, leading to a morphological transition from mesh-like into rod-like and sphere-like. Coarsening of the β -Nb phases occurred with increasing holding time. The martensite transformation temperature increases after solution treatment, mainly attributed to: ( i ) reduced lattice distortion due to the Nb expulsion from the supersaturated B2-NiTi, and ( ii ) the Ti expulsion from the β -Nb phases that lowers the ratio Ni/Ti in the B2-NiTi matrix, which resulted from the microstructure changes from non-equilibrium to equilibrium state. The thermal hysteresis of the solutionized alloys is around 145 K after 20% pre-deformation, which is comparable to the conventional NiTiNb alloys. A short-term solution treatment (i.e. at 1 273 K for 30 min) enhances the ductility and strength of the as-printed specimen, with the increase of fracture stress from (613 ± 19) MPa to (781 ± 20) MPa and the increase of fracture strain from (7.6 ± 0.1)% to (9.5 ± 0.4)%. Both the as-printed and solutionized samples exhibit good tensile shape memory effects with recovery rates >90%. This work suggests that post-process heat treatment is essential to optimize the microstructure and improve the mechanical performances of the L-PBF in-situ alloyed parts.

The Martensitic Transformation Behavior and Shape Memory Effect of Laser Powder Bed Fusion NiTi Alloys Influenced by Rare Earth Addition

Fabrication of Integrated Ni-Ti Alloys Possessing Both Super-elastic and Shape Memory Properties by Laser Powder Bed Fusion

Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion

Effect of Fe Addition on the Microstructure, Transformation Behaviour and Superelasticity of NiTi Alloys Fabricated by Laser Powder Bed Fusion

Regulation of Microstructure, Phase Transformation Behavior, and Enhanced High Superelastic Cycling Stability in Laser Direct Energy Deposition NiTi Shape Memory Alloys Via Aging Treatment

Anti-tribocorrosion resistance of NiTi-CeO2 alloys fabricated by laser powder bed fusion

Fabrication of multi-functional Ni–Ti alloys by laser powder bed fusion

Influence of Nb addition and process parameters on the microstructure and phase transformation behavior of NiTiNb ternary shape memory alloys fabricated by laser powder bed fusion

Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: A review

Achieving illustrious friction and corrosion resistance on a laser powder bed fusion nitinol rare earth alloy

Effect of Laser Energy Density on Transformation Behavior and Mechanical Property of NiTi Alloys Fabricated by Laser Powder Bed Fusion

Mechanical Behavior and Shape Memory Effects of NixTi1‐x alloys with Tunable Mixing of Ni/Ti Powders by Laser Directed Energy Deposition

Molecular Dynamics Simulation of NiTi Shape Memory Alloys Produced by Laser Powder Bed Fusion: Laser Parameters on Phase Transformation Behavior

Effect of Laser Welding of Preset Rare Earth to the Welded Joint on the Functional Properties of the Ti-50.9at% Ni Shape Memory Alloy

Formation Mechanism of Heterogeneous Microstructures and Shape Memory Effect in NiTi Shape Memory Alloy Fabricated Via Laser Powder Bed Fusion

Effect of Rare Earth Ce Addition on Mechanical Properties of Ti-Ni Shape Memory Alloys

Strengthening Mechanism and Micropillar Analysis of High-Strength NiTi–Nb Eutectic-Type Alloy Prepared by Laser Powder Bed Fusion

Mechanical Properties of Additive Laser-Welded NiTi Alloy

Effect of Solution Treatment on the Microstructure, Phase Transformation Behavior and Functional Properties of NiTiNb Ternary Shape Memory Alloys Fabricated Via Laser Powder Bed Fusion In-Situ Alloying

Laser beam powder bed fusion of NiTiFe shape memory alloys by in-situ alloying: microstructural evolution and generation of strain glass

Effect of solution treatment on the microstructure, phase transformation behaviour and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying