Abstract:Under the influence of temperature change, construction quality, and external force, concrete structures are prone to generate cracks which poses a significant threaten to the safety of the structure. With the advantages of distributed monitoring over traditional methods, the distributed fiber optic sensing (DFOS) technology has become a widely accepted method in concrete cracks detection and monitoring. Both laboratory tests and field monitoring indicate that the crack location can be determined by the strain peak and the width of cracks can be derived by integrating the strain exerted on the optical cable. Nevertheless, when the neighboring crack spacing distance (CSD) is sufficiently small, the strain induced by cracks will overlap and two strain peaks will be partially weighted, forming a saddle-shaped double strain peak. Thus, how to calculate the crack opening displacement (COD) becomes a big challenge. To tackle this issue, an analytical method to calculate the opening of neighboring cracks based on the shear strain transfer mechanism is proposed. The effectiveness of this method was evaluated through a crack simulation experiment and further validated by a concrete beam loading test. The strain variations induced by neighboring cracks were recorded by optical frequency domain reflectometry (OFDR) technology and the width of neighboring cracks was calculated using the proposed method. By comparing the calculation results with measured values, the accuracy of the proposed method was verified, which provided a feasible way to calculate the COD of neighboring cracks with strain overlap.

Experimental and Numerical Investigation into Corrosion-Induced Mortar/concrete Cracking with Distributed Optical Fiber Sensors

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Localization and Monitoring of Initiation and Propagation of Corrosion-Induced Mortar Cracking Based on OFDR Distributed Optical Fiber Sensor

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Towards an Automated Crack Monitoring using Distributed Fiber Optic Sensors

Crack monitoring on concrete structures with distributed fiber optic sensors—Toward automated data evaluation and assessment

Experimental Research on Concrete Crack Recognizing and Monitoring Based on Distributed Fiber Sensor

Simulation and Experimental Verification of the Non-Uniform Corrosion Cracking Process of Reinforced Mortar Specimen

Embedded Distributed Optical Fiber Sensors in Reinforced Concrete Structures—A Case Study

A Monitoring Method Based On Fbg For Concrete Corrosion Cracking

Distributed cracks detection by BOTDA and its application in corrosion cracking monitoring

Effect of Stress Level and Localized Corrosion on the Strain Transfer Between Corroded Steel Rebar and Distributed Fiber Optic Sensor

Fiber optic sensing of concrete cracking and rebar deformation using several types of cable

Theoretical and Experimental Investigation into Detection of Early-Stage Propagation of Double Cracks with Distributed Fiber Optic Sensor

Calculation the Opening of Neighboring Surface Cracks in Concrete Structure Based on OFDR Technology

An Experimental Investigation on Continuous Strain and Crack Monitoring with Fiber Optic Sensors

Deformation monitoring and numerical simulation of prestressed concrete beam with local corrosion and fracture of prestressed steel

Evaluation of Corrosion Expansion of Reinforced Concrete Specimen Using Fiber Optical Brillouin Sensing Technique

Crack Detection Using Embedded Fiber-Optic Sensors in Reinforced Concrete Beams