Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Cutting Force Prediction Between Different Machine Tool Systems Based on Transfer Learning Method

Prediction and Compensation of Force-Induced Deformation for a Dual-Machine-based Riveting System Using FEM and Neural Network

High-accurate Cutting Forces Estimation by Machine Learning with Voice Coil Motor-Driven Fast Tool Servo for Micro/nano Cutting

Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis

Deep learning-based cutting force prediction for machining process using monitoring data

Prediction of cutting force via machine learning: state of the art, challenges and potentials

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Milling Force Prediction Based on Support Vector Machine

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Machine learning cutting forces in milling processes of functionally graded materials

Inverse model of the cutting forces prediction in orthogonal cutting

Force prediction in ultrasonic vibration-assisted milling

Intelligent monitoring of milling tool wear based on milling force coefficients by prediction of instantaneous milling forces

Three-dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius

A Time-Series Data-Driven Method for Milling Force Prediction of Robotic Machining

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Investigation on eXtreme Gradient Boosting for cutting force prediction in milling

A hybrid modeling method for predicting the cutting force in whirlwind milling of lead screw

An accurate cutting tool wear prediction method under different cutting conditions based on continual learning

Prediction of thin-walled workpiece machining error: a transfer learning approach