Abstract:<p>Cutting force provides a basis for predicting tool wear and fracture, surface quality of component, as well as vibration and power demand of machine tools during the process of turning. Based on the finite element and mechanical analysis model, a three-dimensional (3-D) cutting force prediction model with consideration given to the edge radius and the nose radius of cutting tool is proposed in this paper. Firstly, combined with cutting force experiment, 3-D cutting simulation is performed in Deform to determine the appropriate Johnson-Cook (J-C) material constitutive model, and the two-dimensional (2-D) orthogonal cutting model is simulated by applying the determined J-C model. By observing the strain rate distribution in the shear zone, the shear angle is obtained, while the nonlinear regression model of shear angle, cutting speed and cutting thickness is conducted. Then, taking into account the impact of nose radius on the cutting process, 3-D oblique cutting is converted into equivalent orthogonal cutting using the chip flow angle and the equivalent cutting edge. The method used to determine the strain rate coefficient of the second deformation zone is redefined in the modified Oxley model, and the chip forming force is calculated. Based on the Waldorf slip line field model, the plowing force generated by the edge radius is predicted. Finally, the cutting force of 3-D oblique turning is obtained by means of coordinate transformation. The proposed model is validated by the excellent consistency between the theoretical predictions and the results obtained after referencing literature data and performing experiment of cutting 304 stainless steel and Inconel 718.</p>

Inverse model of the cutting forces prediction in orthogonal cutting

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

Extended Octree for Cutting Force Prediction

Mathematical modeling of cutting layer geometry and cutting force in orthogonal turn-milling

Three-dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

A New Method for Cutting Force Prediction in Peripheral Milling of Complex Curved Surface

A New Procedure for the Prediction of the Cutting Forces in Peripheral Milling

The Prediction Model of Cutting Forces Based on Johnson-Cook’s Flow Stress Model

Stochastic Cutting Force Modeling and Prediction in Machining

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

Modeling of Cutting Forces During Machining

Cutting force prediction based on a curved uncut chip thickness model

Analytical prediction of cutting forces in cylindrical turning of 304 stainless steel using unequal division shear zone theory

An accurate prediction method of cutting forces in 5-axis flank milling of sculptured surface

Experimental analysis and modeling of cutting power model

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

Improvement of the Unequal Division Shear Zone Model Based on Sensitivity Analysis and Classification of Uncertain Parameters

Theoretical Prediction and Validation on Cutting Temperature Distribution for Dry Cutting