Abstract:Parameter values adopted in railway engineering analysis at present are generally obtained through triaxial tests, whereas the remarkable difference between the actual stress path during train passage and the loading path in cyclic triaxial tests may lead to inaccurate predictions and even engineering problems. Published researches show that the actual stress path probably contains principal stress rotation(PSR), which has a sisgnificant influence on the mechanical response of soil. However, the conventional approach, i.e. cyclic triaxial test is not efficient in simulating this complicated stress path involving PSR. Instead, hollow cylinder test with cyclic shear stress has been proved to be an excellent selection for PSR study. In order to obtain reliable stress path for guiding hollow cylinder tests, three-dimensional calculation for a certain urban railway is carried out; and the distribution regularity of cyclic stress amplitudes, cycle numbers and PSR under train loads is analyzed. Furthermore, a series of cyclic torsional shear tests on hollow cylinder samples is employed to simulate the complex stress path and to research the deformation and pore pressure accumulation properties of saturated soft clay. Considering stress in foundation soil decreasing along with the depth increasing, various cyclic stress amplitudes corresponding to different depths are adopted in this experiment study. Three-dimensional calculation shows that the major principal stress axis will rotate from -90 degrees to 90 degrees during the train loading passage as well as the number and amplitude of stress waves reduce gradually with the increase of depth. It is also shown that both PSR and stress are quite sensitive to train loads as the upper soil element can identify a single wheel load while the lower soil element can just identify a bogie and even the whole train load. And through the cyclic torsional shear tests, it's obvious that the rotation of principal stress can promote the accumulation of pore pressure and strain in soft soil foundations significantly; and in the case when vertical cyclic stress amplitude equals to 15 kPa, the pore pressure and strain in cyclic torsional shear test are 77% and nearly 50% higher than that in cyclic triaxial test respectively. What's more, as the cyclic stress amplitude increases, the gap of cumulative pore pressure and strain between that two types of tests will enlarge further, which may even result in essential difference that samples in triaxial tests show only small strain whereas failure in torsional shear tests.

A New True Triaxial Apparatus for Finite Deformation with a Novel Rigid–Flexible Loading Device

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

A new "mix-confined" repeated load test for evaluating permanent deformation of asphalt mixture

Cyclic Deformation Behaviour of Natural K 0 -Consolidated Soft Clay under Different Stress Paths

Deformation Characteristics of Saturated Clay in Three-Dimensional Cyclic Stress State

An Automatic Three-Dimensional Loading Apparatus for Static Tests of Truss Joints

Research on mechanical response of soft clay under cyclic loading involving principal stress rotation

A novel method for imitating true-triaxial stress path with conventional triaxial apparatus

Undrained deformation behavior of saturated soft clay under long-term cyclic loading

Development and application of novel hollow cylinder apparatus

Development and Application of 3D Soil-Structure Interface Test Apparatus

An Automated Large-Scale Apparatus for 3-D Cyclic Testing of Soil-Structure Interfaces

Development of a Large-scale Computer-controlledCompression-torsional Multi-axial Loading Apparatus

Biaxial Tension Test of Soft Materials

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

Anisotropic and Noncoaxial Behavior of K0-Consolidated Soft Clays under Stress Paths with Principal Stress Rotation

Stress–strain Response of Soft Clay to Traffic Loading

Deformation behavior of K0-consolidated soft clay under traffic load-induced stress paths

Influence of Shear Stress Level on Cyclic Deformation Behaviour of Intact Wenzhou Soft Clay under Traffic Loading

BEHAVIOR OF PORE WATER PRESSURE IN DYNAMIC TRIAXIAL TESTS OF SATURATED SOFT CLAY AND ITS EFFECT ON EFFECTIVE STRESS PATH

Residual Deformation Theory and Test Study on Saturated Soft Clay under Action of Strong Earthguake