Abstract:Electroreduction of CO2 is one of the most promising CO2 conversion pathways because of its moderate reaction conditions, controllable product composition, and environment-friendliness. However, most of the current CO2 electroreduction technologies have not reached the techno-economic threshold for a competitively profitable electrochemical process. Based on a simple two-electron transfer process, the electroreduction of CO2 to CO, which is further processed into syngas with the reduction of H2O to H-2, is postulated to be the most promising pathway for a profitable electrochemical process. Such a process urgently requires nonprecious electrocatalysts that can precisely control the CO/H-2 ratio. Herein, we present a tailored synthesis of bifunctional electrocatalysts with high activity, which can realize the preparation of syngas with controlled compositions via molecular engineering of a ternary nanocomposite. Specifically, a mixture of melamine, triphenylphosphine, and nickel acetate was milled and dissolved in ethanol; the ternary nanocomposite was obtained after rotary evaporation of the mixture. We prepared the catalysts by pyrolyzing the obtained composites at 850 degrees C for 2 h. The synthesis strategy was facile and easy to scale. The specific surface area and pore volume of the bifunctional electrocatalyst were both significantly enhanced upon increasing the concentration of the phosphorus source, triphenylphosphine, during the precursor preparation. The obtained bifunctional electrocatalysts had hierarchically porous structures, which had well-dispersed active sites and could promote mass transport. Raman spectra revealed higher degrees of disorder with higher P/Ni ratios in the precursor. X-ray photoelectron spectroscopy verified the presence of Ni-P-x and Ni-N-x functionalities, which were the active sites for hydrogen evolution and CO2 reduction, respectively. Hence, the electrocatalytic performance of this series of bifunctional electrocatalysts can be tuned from CO-dominant to H-2-dominant. The electrochemical performance was evaluated using a CO2-saturated 0.5 mol.L-1 KHCO3 aqueous solution at ambient temperature by linear sweep voltammetry and potentiostatic electrolysis. Through these experiments, we determined that the activity of the catalysts was influenced by the surface phosphorus/Ni-N-x site ratio. The highest CO faradaic efficiency (91%) was achieved at -0.8 V (versus a reversible hydrogen electrode, RHE) with Ni-N-C in the absence of Ni-P. The CO/H-2 molar ratio in the syngas stream was tunable from 2 : 5 to 10 : 1 in the potential range from -0.7 to -1.1 V (vs RHE) with a total faradic efficiency of 100%. The syngas composition directly links to the molar ratio of the two integrated components, nickel phosphide and Ni-N-C. Additionally, the stability of the optimized bifunctional electrocatalyst at -0.7 V for 8 h was tested, in which the CO/H-2 ratio was maintained between 1.2 and 1.3, indicating excellent stability. This study provides a new perspective for the engineering of bifunctional electrocatalysts for the conversion of abundant CO2 and water into syngas with tailorable CO/H-2 ratios.

Pd-SnO2 interface enables synthesis of syngas with controllable H-2/CO ratios by electrocatalytic reduction of CO2

Pd-SnO2 interface enables synthesis of syngas with controllable H2/CO ratios by electrocatalytic reduction of CO2

Pd-Doped Tin Oxide Nanostructured Catalysts for Electrochemical Reduction of Carbon Dioxide

Sn-Doped Bi2O3 Nanosheets for Highly Efficient Electrochemical CO2 Reduction Toward Formate Production.

Porous Palladium Nanomeshes with Enhanced Electrochemical CO2-into-Syngas Conversion over a Wider Applied Potential

Electrochemical Reduction of Carbon Dioxide to Methanol on Hierarchical Pd/SnO2 Nanosheets with Abundant Pd-O-Sn Interfaces

Hierarchical Heterostructure of SnO2 Confined on CuS Nanosheets for Efficient Electrocatalytic CO2 Reduction.

Regulating the photoelectrocatalytic reduction efficiency of CO2 to syngas via SnO enhanced g-C3N4 based p-n heterojunction

Strongly Coupled Ag/Sn-SnO2 Nanosheets Toward CO2 Electroreduction to Pure HCOOH Solutions at Ampere-Level Current

Electrochemical Conversion of CO2 to Syngas with Palladium-Based Electrocatalysts

Theoretically Designed Cu10Sn3‐Cu‐SnOx as Three‐Component Electrocatalyst for Efficient and Tunable CO2 Reduction to Syngas

Heterophase Engineering of SnO2/Sn3O4 Drives Enhanced Carbon Dioxide Electrocatalytic Reduction to Formic Acid

Engineering of Bifunctional Nickel Phosphide@Ni-N-C Catalysts for Selective Electroreduction of CO2-H2O to Syngas

Triple-phase electrocatalysis for the enhanced CO2 reduction to HCOOH on a hydrophobic surface

Electrochemical reduction of CO2 to synthesis gas with controlled CO/H2 ratios

Layered Pd oxide on PdSn nanowires for boosting direct H 2 O 2 synthesis

Ultrathin Two-Dimensional PdMo Curved Nanosheets for Tunable CO 2 Electrocatalytic Reduction to Syngas

Sn Dopants with Synergistic Oxygen Vacancies Boost CO2 Electroreduction on CuO Nanosheets to CO at Low Overpotential

Promoting the Direct H2 O2 Generation Catalysis by Using Hollow Pd-Sn Intermetallic Nanoparticles.

Amorphous Sn(HPO4)2-derived phosphorus-modified Sn/SnOx core/shell catalyst for efficient CO2 electroreduction to formate

Pyridine Grafted On Sno2-Loaded Carbon Nanotubes Acting As Cocatalyst For Highly Efficient Electroreduction Of Co2