Abstract:The concept of biomass CaO-sorbent based Chemical Looping Gasification (CLG) have gained increasing attention for its ability of reducing CO2 emission by in situ CO2 capture, allowing for the production of a CO2-rich stream for sequestration and a high-hydrogen-content product gas. The core unit of CLG system is comprised of an interconnected dual-circulating fluidised bed reactors: the gasifier and the combustor (regenerator). Biomass feedstock is given into the gasifier, in which steam is gasifying agent and fluidizing wind, CaO sorbent could absorb CO2 generated from biomass gasification through carbonation, which changes the chemical equilibrium and strongly stimulates H2 production. In combustor, the remain char from gasifier burns with air/O2, generates the necessary heat for the CaCO3 decomposition and sensible heat delivery through bed material circulation. In this research, parametric analyses on the dual-fluidized bed system were carried out based on ASPEN Plus simulation. Gibbs free energy minimization approach was used to build the reactors model, the PB-RM is chosen as the property method. Native pine sawdust was chosen as feedstock, at a feed rate of 10 t/hr. Mass and energy coupling of two reactors are calculated by setting the combustor temperature at 900°C constantly. The compositions of the product gases, hydrogen yield & hydrogen production efficiency (HPE), cold gas efficiency (CGE) and gasifier carbon conversion ratio were correlated to the gasification operating variables, such as gasifier temperature (T), pressure (P), minimum mole ratio of CaO to carbon ([Ca]/[C]), and mole ratio of steam to carbon ([H2O]/[C]). The appropriate temperature should consider two aspects: the thermodynamics and the chemical kinetics in gasifier. The model shows that higher temperature than 700°C may not fit for H2 production because of the dramatic decrease of H2 and increase of CO2 concentration in product gas, while the model also overlooked the backward chemical kinetics under lower temperatures than 700°C, which means 700°C maybe a favourable one. Pressure study demonstrate that higher pressure than atmosphere is obviously beneficial for H2 concentration, which increased from 84.5% to 93.9% when system pressure increased from 1 bar to 3 bar. 3 bar is likely the best value for the hydrogen production, at which the hydrogen yield and HPE was up to 43.7 mol·kg and 78.5%. Higher pressure than 3 bar is in favour of CGE and H2 concentration in product gas, but not observably. Thermodynamically there is a minimum value of [Ca]/[C], which is 0.296 in this biomass case under standard operating condition, to insure the absorption of CO2 in gasifier. But in reality, researchers must consider the sorbent maximum conversion, kinetics of CO2–sorbent reaction and sorbent capacity decay during cyclic carbonation–regeneration reaction, so that higher [Ca]/[C] than the minimum is needed, e. g. unity or larger. Optimal [H2O]/[C] can be discerned around 1.25, 76.14%

Design and Optimization of a Clean Ammonia Synthesis System Based on Biomass Gasification Coupled with a Ca–Cu Chemical Loop

Process Simulation, Thermodynamic and System Optimization for the Low-Carbon Alcohols Production Via Gasification of Second-Generation Biomass

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

A new scheme for ammonia and fertilizer generation by coal direct chemical looping hydrogen process: Concept design, parameter optimization, and performance analysis

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Highly Efficient CO2 Capture and Utilization of Coal and Coke-Oven Gas Coupling for Urea Synthesis Process Integrated with Chemical Looping Technology: Modeling, Parameter Optimization, and Performance Analysis

Configuration Optimization of a Biomass Chemical Looping Gasification (CLG) System Combined with CO2 Absorption

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Process modeling and analysis of a novel system achieving near-complete utilization of captured CO 2 from chemical looping hydrogen generation

Thermodynamic and Economic Analysis of an Ammonia Synthesis Process Integrating Liquified Natural Gas Cold Energy with Carbon Capture and Storage

Process integration and thermodynamic analysis of a multi-generation system including solar-assisted biomass gasification and chemical looping ammonia generation

Thermodynamic analysis of a novel biomass polygeneration system for ammonia synthesis and power generation using Allam power cycle

A novel system integrating water electrolysis and supercritical CO 2 cycle for biomass to methanol

Process Optimization and CO2 Emission Analysis of Coal/Biomass Gasification Integrated with a Chemical Looping Process

A Novel System Integrating Water Electrolysis and Supercritical CO2 Cycle for Biomass to Methanol

Optimal design, thermodynamic, cost and CO2 emission analyses of coal-to-methanol process integrated with chemical looping air separation and hydrogen technology

Conceptual Design Development of Coal-to-Methanol Process with Carbon Capture and Utilization

Simulation on Hydrogen Production from Biomass with Cao-Based Chemical Looping Gasification

Design of an Industrial Chemical Looping Gasification System

Co-feeding Biomass and Municipal Solid Waste for Enhanced Hydrogen and Synthetic Natural Gas Yields Employing Chemical Looping Process

Modeling, optimization, and system evaluation of ammonia production processes by direct chemical looping of petroleum coke/coal