Abstract:This study aimed to investigate the mechanical behavior of an environmentally friendly granulated blast furnace slag-based geopolymer matrix reinforced with modified multi-walled carbon nanotubes (MWCNTs). The modified MWCNTs were obtained using a modification method combining nitric acid and sulfuric acid and were then dispersed using sodium dodecylsulfate (SDS) as a dispersant. Two types and three concentrations of MWCNTs were mixed directly into the aqueous solution, sonicated, and then mechanically mixed with waste granulated blast furnace slag to form the geopolymer matrix. Raman and Fourier transform infrared (FT-IR) spectroscopy were used to evaluate the ordered structure and crystallization degree of the modified MWCNTs. Then, the dispersity of the modified MWCNTs was characterized using transmission electron microscopy (TEM). The compressive and bending strengths were measured to evaluate the mechanical behavior of specimens. Moreover, the polycondensation products, polycondensation degree, pore structure, and microscopic morphology of the geopolymer matrix were analyzed using X-ray diffraction (XRD), FT-IR spectroscopy, nuclear magnetic resonance (NMR), mercury intrusion porosimetry (MIP), and field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDS). The experimental results showed that the incorporation of 0.1% functionalized MWCNTs had an optimal influence on the fluidity and mechanical behavior. The slump diameters of geopolymers with 0.1% functionalized MWCNTs with and without SDS were increased by 16.3% and 23.5%, respectively, compared with the reference geopolymer matrix. For geopolymer matrix samples at a curing age of 28 d, the compressive strength of geopolymers with 0.1% functionalized MWCNTs with and without SDS were increased by 16.3% and 17.6%, respectively. For the bending strength, the corresponding increases were 17.6% and 18.7%, respectively. It was found that functionalized MWCNTs could increase the degree of polycondensation, leading to a more traditional amorphous N-A-S-H phase, a finer C–S–H phase, more Q4 (2Al) and Q4 (3Al), and lower porosity. In addition, the propagation of micro-cracks in the geopolymers was inhibited by the incorporation of functionalized MWCNTs.

Multi-scale Effects of Tensile Properties of Lightweight Engineered Geopolymer Composites Reinforced with MWCNTs and Steel-Pva Hybrid Fibers

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Effect of fly ash cenospheres on properties of multi-walled carbon nanotubes and polyvinyl alcohol fibers reinforced geopolymer composites

Dynamic compressive properties of lightweight engineered geopolymer composites containing ceramsite (LW-EGC)

Effects of PVA fibers and multi-walled carbon nanotubes reinforcement on uniaxial compression fatigue properties of Engineered geopolymer composites

Properties of modified engineered geopolymer composites incorporating multi-walled carbon Nanotubes(MWCNTs) and granulated blast furnace Slag(GBFS)

Influence of Fiber Type on Mechanical Properties of Lightweight Cement-Based Composites

Hybrid Effect of PVA Fibre and Carbon Nanotube on the Mechanical Properties and Microstructure of Geopolymers

Mechanical strength and mineralogical properties of fiber-reinforced geopolymer composites with multi-walled carbon nanotubes

Investigation on Physical Behavior, Impermeability and Micromechanism of Engineering Geopolymer Composites Modified with MWCNTs

Influence of a Liquid-Like MWCNT Reinforcement on Interfacial and Mechanical Properties of Carbon Fiber Filament Winding Composites

Influence of modified multi-walled carbon nanotubes on the mechanical behavior and toughening mechanism of an environmentally friendly granulated blast furnace slag-based geopolymer matrix

Multiscale Insights on Enhancing Tensile Properties of Ultra-High Performance Cementitious Composite with Hybrid Steel and Polymeric Fibers

Hybrid effect of carbon nano‐fillers on the interlaminar fracture toughness of fiber metal laminates

Hybrid effect of carbon nanotubes and basalt fibers on mechanical, durability, and microstructure properties of lightweight geopolymer concretes

The effect of carbon nanofibers on fresh and mechanical properties of lightweight engineered cementitious composite using hollow glass microspheres

Effect of Fiber Content on the Microstructure and Mechanical Properties of Carbon Fiber Felt Reinforced Geopolymer Composites

Properties of Fiber-Reinforced Geopolymer Mortar Using Coal Gangue and Aeolian Sand

Epoxy/ionic Liquid-Like MWCNTs Composites with Improved Processability and Mechanical Properties

Study on the Properties of Multi-Walled Carbon Nanotubes (MWCNTs)/Polypropylene Fiber (PP Fiber) Cement-Based Materials