Abstract:<p>Engineered cementitious composites (ECC) are widely used owing to their high tensile capacity and strain-hardening behavior; however, the use of large quantities of cement require huge amount of resources and pollutes the environment. Fly ash-based geopolymer has been considered as a promising alternative for the development of high-ductility eco-friendly engineered materials. To improve the tensile capacity of engineered geopolymer composites (EGC), an ultra-high-ductility engineered geopolymer composite has been developed with the incorporation of functionalized multi-walled carbon nanotubes and polyvinyl alcohol fiber. This paper reports the mixture process and mechanical tests on EGC with different mixtures. Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction were used to investigate the characteristics of the reaction products in the geopolymer matrix. The microscopic morphology of the geopolymer matrix were characterized using field emission scanning electron microscopy. The excellent saturated multiple cracking properties and strain hardening of the ultra-high EGC (UHEGCs) were demonstrated by uniaxial tension testing. At the maximum limit, the residual crack width and crack spacing of UHEGCs were generally less than 70 μm and 2 mm, respectively. Tensile strain-hardening behavior with an ultimate tensile strain greater than 8% was experimentally demonstrated for the UHEGC. Meanwhile, the compressive strength of the UHEGC was greater than 45 MPa. The pseudo-strain hardening (PSH) indexes of UHEGC were used to determine the tensile capacity formation. Analysis demonstrated that the tensile capacity of UHEGC can be quantified using the classic PSH criterion, whereas ultra-high crack-bridging capacity was attributed to the ultra-high-ductility of UHEGC. The XRD studies demonstrated that for the reaction products of the geopolymer matrix, new crystalline phases are insignificant. The FT-IR analyses revealed that the amorphous aluminosilicate phases were mainly reaction products, i.e., N-A-S-H. Most importantly, the multi-scale (micro- and meso-scale) modification mechanisms of the material through the addition of two fibers were revealed.</p>

The effect of carbon nanofibers on fresh and mechanical properties of lightweight engineered cementitious composite using hollow glass microspheres

Development of strain‐hardening lightweight engineered cementitious composites using hollow glass microspheres

Experimental Study of the Mechanical Properties and Microstructures of Lightweight Toughness Cement-Based Composites

Effect of fly ash cenospheres on properties of multi-walled carbon nanotubes and polyvinyl alcohol fibers reinforced geopolymer composites

Development of High-Strength Light-Weight Cementitious Composites with Hollow Glass Microspheres

Strength, shrinkage and creep of lightweight cementitious composite incorporating carbon nanofibers

Feasibility of Using the Hollow Glass Microsphere to Develop Lightweight CAC-GGBFS-Blended Strain-Hardening Cementitious Composites

Effects of Cenosphere on the Mechanical Properties of Cement-Based Composites

Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay

Ultra-low carbon lightweight engineered cementitious composite: Design and material characterization

Hybrid effect of carbon nanotubes and basalt fibers on mechanical, durability, and microstructure properties of lightweight geopolymer concretes

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Study on the Pore Structure of Lightweight Mortar with Nano-Additives

Experimental Study on Compressive and Flexural Performance of Lightweight Cement-Based Composites Reinforced with Hybrid Short Fibers

Sustainable and cost-effective ultra-lightweight engineered cementitious composite: Design and material characterization

Properties of modified engineered geopolymer composites incorporating multi-walled carbon Nanotubes(MWCNTs) and granulated blast furnace Slag(GBFS)

Hydration mechanism and mechanical properties of a developed low-carbon and lightweight strain-hardening cementitious composites

Optimization of mechanical properties and pore structure of lightweight geopolymer concrete using GGBFS based on LF-NMR technology

Experimental Investigation on the Mechanical and Fracture Evaluation of Carbon Fiber-Reinforced Cementitious Composites with Nano-Calcium Carbonate

Effect of Amorphous Metallic Fibers on Thermal and Mechanical Properties of Lightweight Aggregate Cement Mortars Containing Carbon Nanotubes