Abstract:Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

Low-Cost CuX Catalyst from Blast Furnace Slag Waste for Low-Temperature NH3-SCR: Nature of Cu Active Sites and Influence of SO2/H2O

Low-Cost CuX Catalyst from Blast Furnace Slag Waste for Low-Temperature NH 3 -SCR: Nature of Cu Active Sites and Influence of SO 2 /H 2 O

Insights into the Effects of Sulfate Species on CuO/TiO2 Catalysts for NH3-SCR Reactions

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Low-cost Mn-Ce/CuX Catalyst from Blast Furnace Slag Waste for Efficient Low-Temperature NH3-SCR

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Synthesis of Cu0.5Mg1.5Mn0.5Al0.5Ox Mixed Oxide from Layered Double Hydroxide Precursor As Highly Efficient Catalyst for Low-Temperature Selective Catalytic Reduction of NOx with NH3

Synthesis and Catalytic Performance of Cu1Mn0.5Ti0.5Ox Mixed Oxide As Low-Temperature NH3-SCR Catalyst with Enhanced SO2 Resistance

In situ DRIFTS and DFT studies of SO2 poisoning over Cu-exchanged X zeolite catalyst for NH3-SCR

Poisoning mechanism of KCl, K2O and SO2 on Mn-Ce/CuX catalyst for low-temperature SCR of NO with NH3

Mechanistic Insights into the Promotion of Low-Temperature NH3-SCR Catalysis by Copper Auto-Reduction in Cu-zeolites

Optimization of Isolated Copper Species on the NH3-SCR Performance over Cu/SSZ-39 Modified by Ammonia Water

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Engineering CeZrOx-Cu/SSZ-13 coupled catalysts to synergistically enhance the low-temperature NH3-SCR activity

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range

Promoting Effect of Si on MnOx Catalysts for Low-Temperature NH3-SCR of NO: Enhanced N2 Selectivity and SO2 Resistance

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

H2O And/or SO2 Tolerance of Cu-Mn/SAPO-34 Catalyst for NO Reduction with NH3 at Low Temperature

A Facile and Controllable in Situ Sulfation Strategy for CuCeZr Catalyst for NH3-SCR

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

Synthesis of CrO X /C Catalysts for Low Temperature NH3-SCR with Enhanced Regeneration Ability in the Presence of SO2.