Abstract:Poor understanding of composite powder properties is a bottleneck in the design of high-performance metallic components via laser powder bed fusion (L-PBF). Traditional particle- or fiber-like fillers are known to result in reduced powder flowability and the uncontrollable morphology of composite powders. In this work, we demonstrate a first example of improving the powder properties and L-PBF manufacturability of metallic powders decorated by two-dimensional (2D) nanofillers. 0.5 wt% graphene oxide (GO) sheets were uniformly adhered onto the surface of Ti-6Al-4V (Ti64) powders via an electrostatic self-assembly, with their spherical morphology and particle size uncompromised. The notably enhanced quality of the GO-decorated Ti64 (GO@Ti64) powder bed, indicated by the results of a novel centrifugal separation testing and a recoating experiment, was attributed to the significant reduction in powder/powder and powder/substrate adhesive forces. Moreover, while the thermal conductivity of the GO@Ti64 powders was found to decrease, the laser absorptivity increased as a result of multiple local absorptions of wrinkled GO. The optimal process zone of GO@Ti64 powders was therefore shown to have been extended and to have become wider, enhancing L-PBF printability. High-resolution transmission electron microscopy inspections revealed that the GO/Ti64 build fully consisted of ultrafine martensite structures with a lath width of similar to 91 nm. This novel structure was attributed to the high-temperature, nonequilibrium densification of L-PBF; the complete dissolution of the 2D GO nanosheets into the Ti64 matrix generated a novel carbon-supersaturated, precipitation-free structure. The grain refinement and solid-solution strengthening behaviors led to an increase in the yield strength of the GO/Ti64 build from 1375 MPa to 1793 MPa, and also an increase in its compressive strength, from 1796 MPa to 2032 MPa. The results of this investigation contribute to a better understanding of composite powder properties and can be seen as a significant step toward the preparation of high-performance metallic components via L-PBF.

Microstructures and Mechanical Properties of Carbon-Added Ti Composites Fabricated by Laser Powder Bed Fusion or Spark Plasma Sintering

Microstructural Evolution and Mechanical Properties of Graphene Oxide-Reinforced Ti6Al4V Matrix Composite Fabricated Using Spark Plasma Sintering

Preparation and Performance Study of Titanium‐Based Nanocomposites in Selective Laser Melting: Microstructure Regulation and Optimization of Mechanical Properties

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

Simultaneous Enhancement of Powder Properties, Additive Manufacturability, and Mechanical Performance of Ti–6Al–4V Alloy by 2D-Nanocarbon Decoration

In-situ synthesized TiC/Ti-6Al-4V composites by elemental powder mixing and spark plasma sintering: Microstructural evolution and mechanical properties

Graded microstructure and properties of TiCp/Ti6Al4V composites manufactured by laser melting deposition

Microstructure and tensile properties of TiCp/Ti6Al4V composites by laser melting deposition with different dissolving degrees of TiC

Microstructure and Mechanical Property of Graphene Oxide/alsi10mg Composites Fabricated by Laser Additive Manufacturing

Microstructure evolution and underlying thermal behavior of high-content TiC reinforced titanium matrix composites fabricated by laser directed energy deposition

Microstructure, Mechanical Properties, and Sintering Behavior of Ti3O-Fe2TiO4-TiC Composites

Study on microstructure and tribological properties of nano/micron TiC/TC4 composites fabricated by laser melting deposition

Microstructure and mechanical properties of TiB 2 /Al-5Cu composites fabricated by multi-material laser powder bed fusion

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Microstructure and Tensile Properties of Graphene-Oxide-Reinforced High-Temperature Titanium-Alloy-Matrix Composites.

Laser Powder Bed Fusion of CoCrNi Composite with High Fraction of TiC: the Microstructure and Mechanical Properties at Different Temperatures

Effects of carbon nanomaterials on interfacial structure and mechanical properties of high temperature Ti matrix composites

Investigations of the microstructure and performance of TiCp/Ti6Al4V composites prepared by directed laser deposition

Microstructure and properties of inter/inner-layer regions of TiCp/Ti6Al4V composites manufactured by laser melting deposition

The Microstructure Evolution of TC4-(TiB + TiC)/TC4 Laminated Composites by Laser Melting Deposition

Multilayered Gradient Titanium-Matrix Composites Fabricated by Multi-Material Laser Powder Bed Fusion Using Metallized Ceramic: Forming Characteristics, Microstructure Evolution, and Multifunctional Properties